If you check and change the oil regularly and go to the service station for maintenance, the engine generally does not need to be repaired after driving for 4 to 5 years.
Hello, the whole vehicle warranty is 60,000 yuan for 3 years, and the engine gearbox is 100,000 yuan for 5 years [If there is a problem with the car, ask the car master.4S store professional technician, 10 minutes to solve.
A series of advanced technologies are adopted inside the engine, such as roller rocker arm, hydraulic column, etc., which effectively reduces the failure rate of the engine.
According to relevant statistics, Baojun 560 has been on the market for three years, and only more than 600,000 vehicles have been sold in total. From the launch of the new car to the final distinuation of production, the lifespan of the Baojun 560 is only three years. It is really a pity that the former head of the Baojun brand has now come to the end of his life.
1. This idling jitter may be caused by too much carbon accumulation in your engine or throttle valve, which is still relatively common.
2. The reason for the start-up jitter of the manual transmission is generally caused by the wear and slippage of the clutch pressure plate and disc, most of which are due to aging or quality reasons. This requires replacing the pressure plate and the disc at the same time.
3. It is normal for the car to jitter in the idling state, but the serious jitter phenomenon indicates that the engine of the car has serious carbon accumulation. It is necessary to clean the throttle valve and spark plug in time, otherwise it will cause damage to the engine of the car.
4. The idle speed is relatively high at the beginning of the start, and it is normal for the shaking amplitude to be large. If the car still shakes a lot after heating up, you need to check the spark plugs, oil line and throttle valves. If you are satisfied, please adopt it.
5. The main reasons for engine shaking are as follows: air filter is dirty: air filter is for protectionThe engine is designed to reduce wear and is generally replaced at about 10,000 kilometers. If the replacement is not in time, it will cause insufficient air intake and low idle speed, and the engine will shake. As long as the filter is replaced, it can be solved.
6. Too much carbon accumulation If the carbon accumulation in the engine cylinder is serious, it will cause spark plug blockage and valve blockage, which directly leads to the car's jitter when idling. If the acceleration ability of the car is not as good as before and the shaking is very long-lasting, you can consider cleaning the inside of the engine cylinder.
Baojun 560 is fully equipped with an 8L VVT-i all-aluminum engine, which has obvious advantages of low speed and large torque, maximum power 101 kW, maximum torque 186N·m.The comprehensive fuel consumption is as low as 5L/100km, high power, low fuel consumption, and more cost-effective.
Luxury model: 1.28 million yuan "Luxury model" is the basic configuration of Baojun 560, and it is also the cheapest configuration. It is equipped with a 5L naturally aspirated engine with a maximum power of 82kW and a peak torque of 146Nm, matched with a 5-speed manual transmission or CVT transmission.
The body weight of Baojun 560 is 1545KG, and the body mass of Baojun 730 is 1500KG. The relevant parameters of Baojun 560 are as follows: model parameters. Power system. Chassis system. The relevant parameters of Baojun 730 are as follows: parameters of the whole vehicle. Basic performance. Chassis system.
Safety configuration The 560 Baojun car adopts a new safety configuration and has rich safety performance.It is equipped with a panoramic image monitoring system, which can help drivers more effectively grasp the driving status of the vehicle and reduce the occurrence of accidents.
Baojun 560 has 5 seats, the body size data is 4620/1820/1750mm, and the wheelbase reaches 2750mm. In terms of appearance, the Baojun 560 continues the family-style design elements. The willow-shaped headlights are completely integrated with the three-panel chrome-plated air intake grille, which looks very exquisite.
1. Baojun 560 engine is domestic, from Guangxi Wuling Liuji, a subsidiary of Automobile Group, independently developed and developed. The turbocharger of the 5T engine is from Honeywell. Honeywell International is a diversified high-tech and manufacturing enterprise with a turnover of more than $30 billion.
2. The engine model used in Baojun 560 is LJ479qne2, which is a domestic engine independently developed by Wuling Liuqi, a subsidiary of Guangxi Automobile Group. Baojun 560 is an SUV model launched by Baojun, a Chinese car brand. The carThe engine model used is LJ479qne2, which is an engine independently developed by Wuling Liuqi.
3. It is produced by General Motors and is produced by SAIC General Motors Wuling. Baojun 560 is equipped with LJ479QNE2 137 horsepower L4 generator, matched with 5-speed manual transmission and AMT transmission, maximum power (kW) 101, maximum power speed (rpm) 5600, maximum torque (N·m) 186, maximum torque speed (rpm) 3600-4600.
4. Baojun 560 is equipped with 5T and 8L engines, both of which are produced by Baojun's independent technology. The maximum power of Baojun 560 5T turbocharged engine is 110kW/5500rpm., the maximum torque is 230Nm/2000-3800rpm, and the peak torque is as high as 230Nm.
5. LJ479NE2 engine: It is an engine produced by Liuzhou Wuling Liuji Power Co., Ltd., also known as Liuji LJ479NE2. Baojun 560: Baojun 560 is a home SUV from Wuling. It was launched on July 18, 2015, with a total of 3 models launched.
HS code mapping for re-importation-APP, download it now, new users will receive a novice gift pack.
If you check and change the oil regularly and go to the service station for maintenance, the engine generally does not need to be repaired after driving for 4 to 5 years.
Hello, the whole vehicle warranty is 60,000 yuan for 3 years, and the engine gearbox is 100,000 yuan for 5 years [If there is a problem with the car, ask the car master.4S store professional technician, 10 minutes to solve.
A series of advanced technologies are adopted inside the engine, such as roller rocker arm, hydraulic column, etc., which effectively reduces the failure rate of the engine.
According to relevant statistics, Baojun 560 has been on the market for three years, and only more than 600,000 vehicles have been sold in total. From the launch of the new car to the final distinuation of production, the lifespan of the Baojun 560 is only three years. It is really a pity that the former head of the Baojun brand has now come to the end of his life.
1. This idling jitter may be caused by too much carbon accumulation in your engine or throttle valve, which is still relatively common.
2. The reason for the start-up jitter of the manual transmission is generally caused by the wear and slippage of the clutch pressure plate and disc, most of which are due to aging or quality reasons. This requires replacing the pressure plate and the disc at the same time.
3. It is normal for the car to jitter in the idling state, but the serious jitter phenomenon indicates that the engine of the car has serious carbon accumulation. It is necessary to clean the throttle valve and spark plug in time, otherwise it will cause damage to the engine of the car.
4. The idle speed is relatively high at the beginning of the start, and it is normal for the shaking amplitude to be large. If the car still shakes a lot after heating up, you need to check the spark plugs, oil line and throttle valves. If you are satisfied, please adopt it.
5. The main reasons for engine shaking are as follows: air filter is dirty: air filter is for protectionThe engine is designed to reduce wear and is generally replaced at about 10,000 kilometers. If the replacement is not in time, it will cause insufficient air intake and low idle speed, and the engine will shake. As long as the filter is replaced, it can be solved.
6. Too much carbon accumulation If the carbon accumulation in the engine cylinder is serious, it will cause spark plug blockage and valve blockage, which directly leads to the car's jitter when idling. If the acceleration ability of the car is not as good as before and the shaking is very long-lasting, you can consider cleaning the inside of the engine cylinder.
Baojun 560 is fully equipped with an 8L VVT-i all-aluminum engine, which has obvious advantages of low speed and large torque, maximum power 101 kW, maximum torque 186N·m.The comprehensive fuel consumption is as low as 5L/100km, high power, low fuel consumption, and more cost-effective.
Luxury model: 1.28 million yuan "Luxury model" is the basic configuration of Baojun 560, and it is also the cheapest configuration. It is equipped with a 5L naturally aspirated engine with a maximum power of 82kW and a peak torque of 146Nm, matched with a 5-speed manual transmission or CVT transmission.
The body weight of Baojun 560 is 1545KG, and the body mass of Baojun 730 is 1500KG. The relevant parameters of Baojun 560 are as follows: model parameters. Power system. Chassis system. The relevant parameters of Baojun 730 are as follows: parameters of the whole vehicle. Basic performance. Chassis system.
Safety configuration The 560 Baojun car adopts a new safety configuration and has rich safety performance.It is equipped with a panoramic image monitoring system, which can help drivers more effectively grasp the driving status of the vehicle and reduce the occurrence of accidents.
Baojun 560 has 5 seats, the body size data is 4620/1820/1750mm, and the wheelbase reaches 2750mm. In terms of appearance, the Baojun 560 continues the family-style design elements. The willow-shaped headlights are completely integrated with the three-panel chrome-plated air intake grille, which looks very exquisite.
1. Baojun 560 engine is domestic, from Guangxi Wuling Liuji, a subsidiary of Automobile Group, independently developed and developed. The turbocharger of the 5T engine is from Honeywell. Honeywell International is a diversified high-tech and manufacturing enterprise with a turnover of more than $30 billion.
2. The engine model used in Baojun 560 is LJ479qne2, which is a domestic engine independently developed by Wuling Liuqi, a subsidiary of Guangxi Automobile Group. Baojun 560 is an SUV model launched by Baojun, a Chinese car brand. The carThe engine model used is LJ479qne2, which is an engine independently developed by Wuling Liuqi.
3. It is produced by General Motors and is produced by SAIC General Motors Wuling. Baojun 560 is equipped with LJ479QNE2 137 horsepower L4 generator, matched with 5-speed manual transmission and AMT transmission, maximum power (kW) 101, maximum power speed (rpm) 5600, maximum torque (N·m) 186, maximum torque speed (rpm) 3600-4600.
4. Baojun 560 is equipped with 5T and 8L engines, both of which are produced by Baojun's independent technology. The maximum power of Baojun 560 5T turbocharged engine is 110kW/5500rpm., the maximum torque is 230Nm/2000-3800rpm, and the peak torque is as high as 230Nm.
5. LJ479NE2 engine: It is an engine produced by Liuzhou Wuling Liuji Power Co., Ltd., also known as Liuji LJ479NE2. Baojun 560: Baojun 560 is a home SUV from Wuling. It was launched on July 18, 2015, with a total of 3 models launched.
Furniture imports HS code analysis
author: 2024-12-24 02:03How to align trade data with ERP systems
author: 2024-12-24 01:46How to access restricted trade data
author: 2024-12-24 00:36HS code-based freight consolidation
author: 2024-12-24 00:29Trade analytics for risk mitigation
author: 2024-12-23 23:28Sustainable sourcing via HS code tracking
author: 2024-12-24 01:50Medical diagnostics HS code classification
author: 2024-12-24 01:21Long-tail trade keyword research
author: 2024-12-24 01:19Trade intelligence for marine cargo
author: 2024-12-24 01:05HS code alignment with import quotas
author: 2024-12-24 00:48945.52MB
Check349.65MB
Check397.84MB
Check137.75MB
Check785.84MB
Check454.71MB
Check122.97MB
Check166.67MB
Check767.83MB
Check555.85MB
Check976.18MB
Check537.26MB
Check334.12MB
Check917.31MB
Check199.51MB
Check541.88MB
Check557.67MB
Check394.58MB
Check945.85MB
Check627.15MB
Check876.39MB
Check544.34MB
Check133.11MB
Check411.34MB
Check363.55MB
Check947.73MB
Check778.13MB
Check815.18MB
Check737.93MB
Check742.99MB
Check517.36MB
Check549.99MB
Check825.35MB
Check921.99MB
Check841.59MB
Check516.29MB
CheckScan to install
HS code mapping for re-importation to discover more
Netizen comments More
678 WTO harmonization and HS codes
2024-12-24 01:12 recommend
1452 Processed grains HS code references
2024-12-24 00:59 recommend
1216 Predictive trade data modeling
2024-12-24 00:56 recommend
581 Industrial chemicals HS code monitoring
2024-12-24 00:54 recommend
1934 Trade data for pharmaceuticals supply chain
2024-12-24 00:39 recommend