1. Use the created system to start the USB disk or Win PE USB disk, enter Go to [Command Indicator] Note: There may be differences in the operation screen according to different operation methods.Step 2: Open the command prompt and execute the bcdedit /enum command. If you see the prompt in the red box in the figure below, it means that the boot has been damaged.
2. After opening the computer store and entering, click winpe to boot and repair. There are 'automatic repair', 'advanced repair' and 'manual repair'. In general, automatic repair is selected. However, I usually choose advanced repair, because the automatic repair of the system sometimes does not recognize the boot disk.
3. First, prepare a finished USB disk installation master USB disk boot disk, and then connect the computer to the USB disk boot disk. Restart the computer, press the startup shortcut key when the boot screen appears, select the USB disk to start, and then enter the main menu interface of the USB disk installation master.
4. Prepare a download firstTo repair the USB disk of the system, after inserting the USB disk, enter the main menu interface of Quick Boot through the USB disk boot, move the cursor to "[02] Run Quick Start Win10PE" with the up and down keys on the keyboard and press Enter to confirm. After entering the quick start win10pe system desktop, click "More Tools".
1. Method 1: Enter: CMD in the search bar in the lower left corner of the system desktop, click: command prompt, and you can open the administrator command prompt window. Mouth. 2 Method 2: Right-click the beginning in the lower left corner of the system desktop, and click: Command Prompt (Administrator) in the right-click menu to open the administrator command prompt window.
2. First of all, let's understand the use of the recovery folder. There is already a recovery folder from the Win8 system startup C disk, which is the same as the Win10 system.
3. The first step, enter Win10 This computer, then enter the system disk, and then enter [User]--[System Account Folder]--then find the [Desktop] folder, and then right-click on the [Desktop] folder to open [Properties] in the pop-up menu.
1. Open the command prompt and execute bcdedit / Enum command. If you see the prompt in the red box in the figure below, it means that the boot has been damaged.
2. Download the Xiaobai one-click reinstall tool to make a boot disk, insert the USB disk into the computer, press the F12 startup hotkey continuously, and select the USB disk to start.Then select the first start. After entering pe, we open the boot repair tool. Determine the partition of our boot file.
3. Step 1: First, you need to open the data recovery software and select the recovery mode. Step 2: Then, select the scanning object, such as the USB flash drive, and click the "Start Scan" button. Step 3: After the scan, you can find the video file to be recovered according to the file path or file type.
4. Solution: If you don't want to reinstall Win10, you can only use EasyBCD to repair the system boot items. Download the EasyBCD3v software first, then install it, open it, enter the main program interface, and select "Advanced Settings" in the options on the left.
5,Detailed steps for Win10 repair boot: Insert the USB flash drive into the computer, select the USB flash drive or Windows PE boot from the USB flash drive, and enter the "Command Prompt". Open the command prompt and execute the bcdedit /enum command. If you see the prompt shown in the figure below, it means that the boot record has been damaged.
1. Sometimes the installer cannot start normally because of compatibility problems with the current operating system. The Windows 10 system provides compatibility mode, and you can try to run the installer in compatibility mode.
2. Right-click the security software icon on the taskbar and select the "Exit" or "Close" option.If you can't find the security software icon, you can find it through the hidden icon in the control panel or system tray. Disable all third-party security software, including anti-virus software, firewall, etc.
3. If you can enter safe mode, it means that the driver or application that may have a problem is preventing it from starting normally. You can try to uninstall the recently installed program or update, and then restart the computer. Method 2: Repair boot Use Windows 10 installation media (such as installing USB flash drive or CD-ROM) to start the computer.
4. Method 1: Use the system repair tool to start the computer, enter the Windows 10 startup interface, press the power key, then hold down the Shift key, and click "Restart" at the same time. The computer will enter the "Choose an option" screen and select "Troubleshoot".In the troubleshooting interface, select "Advanced Options".
5. Method 5 Keep clicking the F8 key to enter the system operation menu. If it is Win8, Win81, Win10 system, press the power key for a long time after seeing the boot screen to turn off the power. Repeat about three times in a short time to enter the WinRE Windows recovery environment. , but some users may need to disconnect the power directly so that it should be possible after power-on.
Check the BIOS settings: enter the BIOS interface of the computer to confirm whether the hard disk is recognized correctly. The hard disk may not be displayed in the BIOS or there may be an abnormal situation. Reconnect the hard disk data cable and power cable to ensure a firm connection.
Solution 2: If the above method cannot solve your problem, it means that the partition table has been seriously damaged, which can only be completely solved by reinstalling the system.
To repair the system boot file, you need to make a system boot USB flash drive or Win PE USB flash drive. Step 1: Use the made system to start the USB disk or Win PE USB disk and enter the [command indicator]. Note: The operation screen may be different for different operation methods.
Let select the main hard disk. For example, my main hard disk is an intel SSDPEDMW400GA hard disk. We can return to confirm. If your computer is UEFI mode to boot GPT format hard disk, please select Intel SSDPEDMW400GA at the beginning of the Windows Boot Manager.
Maybe the system was not installed last time, and the system file was incomplete, which caused the inability to enter the system. The system boot file is maliciously damaged, resulting in the inability to start. There is a problem with the disk master boot, resulting in the inability to boot from the system disk.
Solution 2: When the non-pre-installed win10 model leaves the factory, the hard disk defaults to the MBR partition table format, and the UEFI mode only supports the installation of the system on the hard disk of the GPT partition table.
HS code-based value chain optimization-APP, download it now, new users will receive a novice gift pack.
1. Use the created system to start the USB disk or Win PE USB disk, enter Go to [Command Indicator] Note: There may be differences in the operation screen according to different operation methods.Step 2: Open the command prompt and execute the bcdedit /enum command. If you see the prompt in the red box in the figure below, it means that the boot has been damaged.
2. After opening the computer store and entering, click winpe to boot and repair. There are 'automatic repair', 'advanced repair' and 'manual repair'. In general, automatic repair is selected. However, I usually choose advanced repair, because the automatic repair of the system sometimes does not recognize the boot disk.
3. First, prepare a finished USB disk installation master USB disk boot disk, and then connect the computer to the USB disk boot disk. Restart the computer, press the startup shortcut key when the boot screen appears, select the USB disk to start, and then enter the main menu interface of the USB disk installation master.
4. Prepare a download firstTo repair the USB disk of the system, after inserting the USB disk, enter the main menu interface of Quick Boot through the USB disk boot, move the cursor to "[02] Run Quick Start Win10PE" with the up and down keys on the keyboard and press Enter to confirm. After entering the quick start win10pe system desktop, click "More Tools".
1. Method 1: Enter: CMD in the search bar in the lower left corner of the system desktop, click: command prompt, and you can open the administrator command prompt window. Mouth. 2 Method 2: Right-click the beginning in the lower left corner of the system desktop, and click: Command Prompt (Administrator) in the right-click menu to open the administrator command prompt window.
2. First of all, let's understand the use of the recovery folder. There is already a recovery folder from the Win8 system startup C disk, which is the same as the Win10 system.
3. The first step, enter Win10 This computer, then enter the system disk, and then enter [User]--[System Account Folder]--then find the [Desktop] folder, and then right-click on the [Desktop] folder to open [Properties] in the pop-up menu.
1. Open the command prompt and execute bcdedit / Enum command. If you see the prompt in the red box in the figure below, it means that the boot has been damaged.
2. Download the Xiaobai one-click reinstall tool to make a boot disk, insert the USB disk into the computer, press the F12 startup hotkey continuously, and select the USB disk to start.Then select the first start. After entering pe, we open the boot repair tool. Determine the partition of our boot file.
3. Step 1: First, you need to open the data recovery software and select the recovery mode. Step 2: Then, select the scanning object, such as the USB flash drive, and click the "Start Scan" button. Step 3: After the scan, you can find the video file to be recovered according to the file path or file type.
4. Solution: If you don't want to reinstall Win10, you can only use EasyBCD to repair the system boot items. Download the EasyBCD3v software first, then install it, open it, enter the main program interface, and select "Advanced Settings" in the options on the left.
5,Detailed steps for Win10 repair boot: Insert the USB flash drive into the computer, select the USB flash drive or Windows PE boot from the USB flash drive, and enter the "Command Prompt". Open the command prompt and execute the bcdedit /enum command. If you see the prompt shown in the figure below, it means that the boot record has been damaged.
1. Sometimes the installer cannot start normally because of compatibility problems with the current operating system. The Windows 10 system provides compatibility mode, and you can try to run the installer in compatibility mode.
2. Right-click the security software icon on the taskbar and select the "Exit" or "Close" option.If you can't find the security software icon, you can find it through the hidden icon in the control panel or system tray. Disable all third-party security software, including anti-virus software, firewall, etc.
3. If you can enter safe mode, it means that the driver or application that may have a problem is preventing it from starting normally. You can try to uninstall the recently installed program or update, and then restart the computer. Method 2: Repair boot Use Windows 10 installation media (such as installing USB flash drive or CD-ROM) to start the computer.
4. Method 1: Use the system repair tool to start the computer, enter the Windows 10 startup interface, press the power key, then hold down the Shift key, and click "Restart" at the same time. The computer will enter the "Choose an option" screen and select "Troubleshoot".In the troubleshooting interface, select "Advanced Options".
5. Method 5 Keep clicking the F8 key to enter the system operation menu. If it is Win8, Win81, Win10 system, press the power key for a long time after seeing the boot screen to turn off the power. Repeat about three times in a short time to enter the WinRE Windows recovery environment. , but some users may need to disconnect the power directly so that it should be possible after power-on.
Check the BIOS settings: enter the BIOS interface of the computer to confirm whether the hard disk is recognized correctly. The hard disk may not be displayed in the BIOS or there may be an abnormal situation. Reconnect the hard disk data cable and power cable to ensure a firm connection.
Solution 2: If the above method cannot solve your problem, it means that the partition table has been seriously damaged, which can only be completely solved by reinstalling the system.
To repair the system boot file, you need to make a system boot USB flash drive or Win PE USB flash drive. Step 1: Use the made system to start the USB disk or Win PE USB disk and enter the [command indicator]. Note: The operation screen may be different for different operation methods.
Let select the main hard disk. For example, my main hard disk is an intel SSDPEDMW400GA hard disk. We can return to confirm. If your computer is UEFI mode to boot GPT format hard disk, please select Intel SSDPEDMW400GA at the beginning of the Windows Boot Manager.
Maybe the system was not installed last time, and the system file was incomplete, which caused the inability to enter the system. The system boot file is maliciously damaged, resulting in the inability to start. There is a problem with the disk master boot, resulting in the inability to boot from the system disk.
Solution 2: When the non-pre-installed win10 model leaves the factory, the hard disk defaults to the MBR partition table format, and the UEFI mode only supports the installation of the system on the hard disk of the GPT partition table.
Tire imports HS code classification
author: 2024-12-23 22:00Precious metals HS code alignment
author: 2024-12-23 21:52Dynamic import export data modeling
author: 2024-12-23 20:23How to select the best trade data provider
author: 2024-12-23 20:15Livestock products HS code classification
author: 2024-12-23 22:21Global tender participation by HS code
author: 2024-12-23 21:33Comparing international shipping carriers
author: 2024-12-23 21:33HS code mapping to logistics KPIs
author: 2024-12-23 20:38HS code-based trade data analytics
author: 2024-12-23 20:25777.61MB
Check163.17MB
Check338.64MB
Check916.74MB
Check796.79MB
Check445.36MB
Check349.96MB
Check826.34MB
Check511.61MB
Check276.84MB
Check586.51MB
Check449.84MB
Check174.53MB
Check226.64MB
Check572.88MB
Check433.42MB
Check649.55MB
Check593.69MB
Check274.86MB
Check214.19MB
Check272.97MB
Check336.13MB
Check822.92MB
Check727.21MB
Check843.24MB
Check532.14MB
Check739.38MB
Check819.32MB
Check678.61MB
Check694.38MB
Check275.49MB
Check151.56MB
Check788.65MB
Check529.66MB
Check186.74MB
Check935.11MB
CheckScan to install
HS code-based value chain optimization to discover more
Netizen comments More
1458 HS code compliance training for logistics teams
2024-12-23 22:39 recommend
1894 Middle East trade compliance platform
2024-12-23 22:23 recommend
946 International trade KPI tracking
2024-12-23 21:53 recommend
1459 International trade knowledge base
2024-12-23 21:45 recommend
1569 Advanced tariff classification tools
2024-12-23 20:56 recommend