Generally speaking, the three major sources of profit of automobile disassembly enterprises are the recycling and reuse of parts of "five major assemblies (engine, steering wheel, transmission, front and rear axles, frame)" , state subsidies, sales of disassembly materials. Scrapped cars can be said to be a relatively typical renewable resource. After the motor vehicle is scrapped, it will be sent to the car disassembly factory for recycling.
Scrapped cars are quoted by weight. The scrapped vehicle disassembly company accepts a scrapped car at a price of only a few hundred yuan. After taking it back, the scrapped cars are classified and disassembled. The company's profits also mainly come from some recyclable spare parts, metal and non-metallic materials disassembled, followed by many regional governments There will also be some subsidies.
The current profit model of scrapped car disassembly mainly relies on industry and regional monopoly, recycling scrapped vehicles at low prices, and recycling various raw materials, such as scrap steel, non-ferrous metals, plastics, rubber, etc., after mechanized and destructive disassembly.
The disassembly of a scrapped car requires 12 processes such as factory inspection, battery disassembly, engine disassembly, and storage of available parts. It takes 30 minutes for each disassembly of a vehicle.
According to the provisions of Article 7 of the Measures for the Administration of Scrapped Automobile Recycling, if you want to enter the automobile disassembly industry, that is, you want to establish In addition to having a business license and a scrap car recycling license, a scrapped car disassembly company must also meet the following conditions: 1. The registered capital is not less than 500,000 yuan, and the tax law stipulates that you are a general taxpayer.
The qualifications required for dismantling scrapped vehicles are as follows: 1 Have the status of an enterprise legal person 2 The disassembly and business site meets the requirements of the overall planning of the city or the territorial and spatial planning and safety requirements, and shall not be built in residential areas, commercial areas, drinking water source protection areas and other environmentally sensitive areas 3 Scrapped motor vehicles that meet national standards Recycle and disassemble enterprise technology.
Application conditions: the registered capital is not less than 500,000 yuan, and it is a general taxpayer according to the provisions of the tax law; the area of the disassembly site is not less than 5,000 square meters; it has the necessary disassembly equipment and fire fighting facilities; the annual recycling and disassembly capacity is not less than 500 vehicles.
Private acquisition of scrapping of vehicles is suspected of illegal operation. Generally, a sentence will not be imposed, and a fine will be given according to the circumstances. If the circumstances are serious and constitute a crime, criminal responsibility shall be investigated according to law.
Legal analysis: Those who illegally disassemble scrapped cars shall be confiscated by the public security organs and fined not less than 2,000 yuan but not more than 20,000 yuan.
Legal analysis: For unauthorized private scrapped carsFor individuals or units that carry out dismantling, the public security organ may, after verifying that it is true, impose a detention of more than ten days but not more than 15 days, and impose a fine of not less than 500 yuan but not more than 1,000 yuan; if the circumstances are relatively mild, they shall be detained for not more than five days or a fine of not more than 500 yuan.
Drivers who drive the motor vehicles listed in the preceding paragraph on the road shall be fined not less than 200 yuan and not more than 2,000 yuan, and the motor vehicle driver's license shall be revoked. If a motor vehicle that has reached the scrapping standard is sold, the illegal income shall be confiscated and a fine equal to the sales amount shall be imposed, and the motor vehicle shall be dealt with in accordance with the provisions of the first paragraph of this Article.
Legal analysis: confiscate the illegal income; if the illegal income is more than 50,000 yuan, a fine of more than 2 times and less than 5 times the illegal income shall be imposed.
Legal analysis: If the illegal income is more than 20,000 yuan, a fine of more than 2 times and less than 5 times the illegal income shall be imposed.If the illegal income is less than 20,000 yuan or there is no illegal income, a fine of more than 20,000 yuan and not more than 50,000 yuan shall be imposed; if it belongs to the business unit, the business license shall be revoked.
Preparation materials. The owner needs to prepare complete relevant documents, including the vehicle's registration certificate, driving license, license plate number, owner's ID card and the original car. The information is that the scrapping agency should look at carefully. Therefore, the preparation should be complete. In addition, the owner needs to deal with all the illegal information of the vehicle before going through the scrapping procedures.
The owner of scrapped cars shall go through the procedures for scrapping motor vehicles with the public security organs in a timely manner. On the day of acceptance, the public security organ shall issue the "Motor Vehicle Scrapping Certificate" to the owner of the scrapped car and inform him to hand over the scrapped car to the scrapped car recycling enterprise.
The scrapping process of scrapped vehicles that meet the national mandatory scrapping standards is as follows: take the certificate to the dismantling factory to issue a car scrapping notice, send the vehicle to the regular disassembly factory to take photos of the five major assembly disassembly, and apply for scrapping registration and apply for subsidies.
The procedures required for scrapping cars: motor vehicle registration certificate, motor vehicle number plate, and go to the license plate management post to wait for the notice to collect the license plate, and the registration acceptance post applies for the issuance of the Automobile Scrapping Notice for vehicles that have reached the scrapping period.
Recently, Nikkei BP (Japan's largest publishing house) launched A bookThe new book is called "Complete Decomposition of Chinese BYD SEAL (Full Edition)", which records in detail the comprehensive disassembly process of BYD pure electric medium-sized seals by Japanese engineers. As soon as the news came out, the Internet exploded.
According to relevant news, recently, Japan's Nikkei BP News Agency conducted a disassembly survey of BYD Seal [SEAL]. As the largest publishing house in Japan, Nikkei BP News Agency has been committed to promoting the development of the Japanese automobile industry, and has an in-depth understanding of domestic and foreign automobile brands and Research.
This is the first time that Chinese brands have been dismantled after Nikkei BP dismantled Nissan, Tesla, Volkswagen and other brands, showing Japan's attention to China's new energy technology.
1. First of all, we need to find the position of the cigarette lighter. In most models, the cigarette lighter is generally located under the driver's seat, close to the shift lever. Pull out the cigarette lighter. The cigarette lighter is usually installed in a small plastic socket. We need to gently pull the cigarette lighter out and remove it from the socket.
2. Next, we can learn how to disassemble by watching some car cigarette lighter disassembly videos. In these videos, the dismantling person usually uses a flat-mouthed pliers or other tools to remove the socket from the vehicle first. Then, they will separate the socket from the igniter by hand or other tools.
3. The steps are as follows: plug the cigarette lighter into the car power outlet and press down to lock (fix).The cigarette lighter is heated. When the temperature of the electric heating wire is reached, the cigarette lighter will automatically pop up. Wait 5-8 seconds for the electric heating wire to turn red. You don't need to wait for it to pop up by itself. You can also pull it out directly and use it manually.
4. Go to the 4s store or repair shop for disassembly and replacement. The disassembly method of Santana cigarette lighter is as follows: rotary shell: the rotary shell is installed behind the seat of some car cigarette lighters, which can be rotated in the opposite direction and then installed forward; screw disassembly: the back of the cigarette lighter seat of some cars is fixed with screws.
5. How to disassemble the cigarette lighter of the car: turn off the engine and power supply; find the corresponding position and lift the protective plate with a small crowbar; remove the fuse box, and you can see the position of the cigarette lighter on the inside; remove the cigarette lighter. The cigarette lighter socket on the car is next to the gear, with a small groove.
6. This panel is made of plastic hooks.You only need to break the next side directly by hand or turn the rhythmic screwdriver up to disassemble the whole panel. Remove the screw of the cigarette lighter panel. After removing the shift lever panel, press the door of the cigarette lighter panel to open automatically. Then you can see two black screws.
*Paper and pulp HS code insights-APP, download it now, new users will receive a novice gift pack.
Generally speaking, the three major sources of profit of automobile disassembly enterprises are the recycling and reuse of parts of "five major assemblies (engine, steering wheel, transmission, front and rear axles, frame)" , state subsidies, sales of disassembly materials. Scrapped cars can be said to be a relatively typical renewable resource. After the motor vehicle is scrapped, it will be sent to the car disassembly factory for recycling.
Scrapped cars are quoted by weight. The scrapped vehicle disassembly company accepts a scrapped car at a price of only a few hundred yuan. After taking it back, the scrapped cars are classified and disassembled. The company's profits also mainly come from some recyclable spare parts, metal and non-metallic materials disassembled, followed by many regional governments There will also be some subsidies.
The current profit model of scrapped car disassembly mainly relies on industry and regional monopoly, recycling scrapped vehicles at low prices, and recycling various raw materials, such as scrap steel, non-ferrous metals, plastics, rubber, etc., after mechanized and destructive disassembly.
The disassembly of a scrapped car requires 12 processes such as factory inspection, battery disassembly, engine disassembly, and storage of available parts. It takes 30 minutes for each disassembly of a vehicle.
According to the provisions of Article 7 of the Measures for the Administration of Scrapped Automobile Recycling, if you want to enter the automobile disassembly industry, that is, you want to establish In addition to having a business license and a scrap car recycling license, a scrapped car disassembly company must also meet the following conditions: 1. The registered capital is not less than 500,000 yuan, and the tax law stipulates that you are a general taxpayer.
The qualifications required for dismantling scrapped vehicles are as follows: 1 Have the status of an enterprise legal person 2 The disassembly and business site meets the requirements of the overall planning of the city or the territorial and spatial planning and safety requirements, and shall not be built in residential areas, commercial areas, drinking water source protection areas and other environmentally sensitive areas 3 Scrapped motor vehicles that meet national standards Recycle and disassemble enterprise technology.
Application conditions: the registered capital is not less than 500,000 yuan, and it is a general taxpayer according to the provisions of the tax law; the area of the disassembly site is not less than 5,000 square meters; it has the necessary disassembly equipment and fire fighting facilities; the annual recycling and disassembly capacity is not less than 500 vehicles.
Private acquisition of scrapping of vehicles is suspected of illegal operation. Generally, a sentence will not be imposed, and a fine will be given according to the circumstances. If the circumstances are serious and constitute a crime, criminal responsibility shall be investigated according to law.
Legal analysis: Those who illegally disassemble scrapped cars shall be confiscated by the public security organs and fined not less than 2,000 yuan but not more than 20,000 yuan.
Legal analysis: For unauthorized private scrapped carsFor individuals or units that carry out dismantling, the public security organ may, after verifying that it is true, impose a detention of more than ten days but not more than 15 days, and impose a fine of not less than 500 yuan but not more than 1,000 yuan; if the circumstances are relatively mild, they shall be detained for not more than five days or a fine of not more than 500 yuan.
Drivers who drive the motor vehicles listed in the preceding paragraph on the road shall be fined not less than 200 yuan and not more than 2,000 yuan, and the motor vehicle driver's license shall be revoked. If a motor vehicle that has reached the scrapping standard is sold, the illegal income shall be confiscated and a fine equal to the sales amount shall be imposed, and the motor vehicle shall be dealt with in accordance with the provisions of the first paragraph of this Article.
Legal analysis: confiscate the illegal income; if the illegal income is more than 50,000 yuan, a fine of more than 2 times and less than 5 times the illegal income shall be imposed.
Legal analysis: If the illegal income is more than 20,000 yuan, a fine of more than 2 times and less than 5 times the illegal income shall be imposed.If the illegal income is less than 20,000 yuan or there is no illegal income, a fine of more than 20,000 yuan and not more than 50,000 yuan shall be imposed; if it belongs to the business unit, the business license shall be revoked.
Preparation materials. The owner needs to prepare complete relevant documents, including the vehicle's registration certificate, driving license, license plate number, owner's ID card and the original car. The information is that the scrapping agency should look at carefully. Therefore, the preparation should be complete. In addition, the owner needs to deal with all the illegal information of the vehicle before going through the scrapping procedures.
The owner of scrapped cars shall go through the procedures for scrapping motor vehicles with the public security organs in a timely manner. On the day of acceptance, the public security organ shall issue the "Motor Vehicle Scrapping Certificate" to the owner of the scrapped car and inform him to hand over the scrapped car to the scrapped car recycling enterprise.
The scrapping process of scrapped vehicles that meet the national mandatory scrapping standards is as follows: take the certificate to the dismantling factory to issue a car scrapping notice, send the vehicle to the regular disassembly factory to take photos of the five major assembly disassembly, and apply for scrapping registration and apply for subsidies.
The procedures required for scrapping cars: motor vehicle registration certificate, motor vehicle number plate, and go to the license plate management post to wait for the notice to collect the license plate, and the registration acceptance post applies for the issuance of the Automobile Scrapping Notice for vehicles that have reached the scrapping period.
Recently, Nikkei BP (Japan's largest publishing house) launched A bookThe new book is called "Complete Decomposition of Chinese BYD SEAL (Full Edition)", which records in detail the comprehensive disassembly process of BYD pure electric medium-sized seals by Japanese engineers. As soon as the news came out, the Internet exploded.
According to relevant news, recently, Japan's Nikkei BP News Agency conducted a disassembly survey of BYD Seal [SEAL]. As the largest publishing house in Japan, Nikkei BP News Agency has been committed to promoting the development of the Japanese automobile industry, and has an in-depth understanding of domestic and foreign automobile brands and Research.
This is the first time that Chinese brands have been dismantled after Nikkei BP dismantled Nissan, Tesla, Volkswagen and other brands, showing Japan's attention to China's new energy technology.
1. First of all, we need to find the position of the cigarette lighter. In most models, the cigarette lighter is generally located under the driver's seat, close to the shift lever. Pull out the cigarette lighter. The cigarette lighter is usually installed in a small plastic socket. We need to gently pull the cigarette lighter out and remove it from the socket.
2. Next, we can learn how to disassemble by watching some car cigarette lighter disassembly videos. In these videos, the dismantling person usually uses a flat-mouthed pliers or other tools to remove the socket from the vehicle first. Then, they will separate the socket from the igniter by hand or other tools.
3. The steps are as follows: plug the cigarette lighter into the car power outlet and press down to lock (fix).The cigarette lighter is heated. When the temperature of the electric heating wire is reached, the cigarette lighter will automatically pop up. Wait 5-8 seconds for the electric heating wire to turn red. You don't need to wait for it to pop up by itself. You can also pull it out directly and use it manually.
4. Go to the 4s store or repair shop for disassembly and replacement. The disassembly method of Santana cigarette lighter is as follows: rotary shell: the rotary shell is installed behind the seat of some car cigarette lighters, which can be rotated in the opposite direction and then installed forward; screw disassembly: the back of the cigarette lighter seat of some cars is fixed with screws.
5. How to disassemble the cigarette lighter of the car: turn off the engine and power supply; find the corresponding position and lift the protective plate with a small crowbar; remove the fuse box, and you can see the position of the cigarette lighter on the inside; remove the cigarette lighter. The cigarette lighter socket on the car is next to the gear, with a small groove.
6. This panel is made of plastic hooks.You only need to break the next side directly by hand or turn the rhythmic screwdriver up to disassemble the whole panel. Remove the screw of the cigarette lighter panel. After removing the shift lever panel, press the door of the cigarette lighter panel to open automatically. Then you can see two black screws.
*Import data for raw commodities
author: 2024-12-23 22:42How to evaluate free trade agreements
author: 2024-12-23 22:18HS code-based opportunity scanning
author: 2024-12-23 21:07Trade compliance training resources
author: 2024-12-23 20:57Industrial lubricants HS code classification
author: 2024-12-23 20:47Global trade intelligence benchmarks
author: 2024-12-23 22:29Commodity-specific import licensing data
author: 2024-12-23 21:36How to analyze global export trends
author: 2024-12-23 21:20Trade data for public policy design
author: 2024-12-23 21:12Exotic wood imports HS code references
author: 2024-12-23 20:52471.71MB
Check444.95MB
Check666.49MB
Check654.85MB
Check843.91MB
Check122.24MB
Check291.17MB
Check863.66MB
Check526.79MB
Check552.17MB
Check422.29MB
Check411.37MB
Check813.25MB
Check293.49MB
Check912.15MB
Check636.38MB
Check968.99MB
Check114.42MB
Check317.17MB
Check214.13MB
Check818.76MB
Check128.67MB
Check533.25MB
Check257.13MB
Check326.87MB
Check582.47MB
Check244.26MB
Check647.95MB
Check128.59MB
Check564.78MB
Check244.53MB
Check973.95MB
Check225.74MB
Check483.47MB
Check667.64MB
Check543.19MB
CheckScan to install
Paper and pulp HS code insights to discover more
Netizen comments More
1382 Livestock products HS code classification
2024-12-23 22:22 recommend
822 Global trade shipping route optimization
2024-12-23 21:13 recommend
2555 Non-GMO products HS code classification
2024-12-23 20:40 recommend
1422 How to interpret bonded warehouse data
2024-12-23 20:31 recommend
477 Trade data for market entry strategies
2024-12-23 20:11 recommend