The system version is wrong. Yulong CNC machining simulation software v1 uses rules to show that it cannot be opened because the system version is wrong.Yulong CNC machining simulation software v1 is a simulation software that applies virtual reality technology to CNC machining operation skills training and assessment. It is a powerful simulation software.
When installing, the menu machine version, after the installation is completed, it needs to be cracked. Yulong can't keep up with the times, and most people are using Swo. For example, Yulong 7 can only run in XP and below systems, and cannot be used in win7 or above systems.
It may be installed incorrectly. In addition, Yulong has not been updated for a long time, and Win7 and above are not supported.
Compatibility problems, there will be no such problem when installed on a 32-bit operating system.
System failure. Yulong CNC simulation win10 cannot be opened due to system failure or the failure of related services. You can update the system again or select the safe mode in the advanced selection menu to open it.
After you install it, a folder of "CNC Simulation System" appears, which contains an icon like a phone. In general, it is difficult to click on it first, and then click another icon in the same folder to enter..
Use the Swo CNC simulation software, which displays the tool rail by default. As long as you enter the "automatic" mode, the tool track will be displayed.
The mastercam2021 knife track is not displayed because it is hidden. Solution: Press the Win key to open the start menu. Right-click Properties - in the taskbar - select to automatically hide the taskbar. Then check the locked taskbar.
Tool method: Put the method switch back to the reference point, and press the X, Y and Z direction keys respectively to make the machine tool return to the reference point operation. At this time, the screen will display the coordinates of the tool reference point in the machine tool coordinate system. If the origin of the machine tool coincides with the reference point, the coordinates are displayed as (0, 0, 0).
CNC lathe flankThe method of the system to see the tool trajectory diagram of the program on the screen: click the graphic, press the machine tool lock, spindle lock, and start the cycle.
I have versions 0 and 8 of Yulong CNC simulation system. 0 can be installed directly. After installation, copy the icon in crack to the installation directory (by the way, select the teacher's machine). After that, open the password lock (telephone icon) first, and then turn on the simulation system, and that's it.
If the program name in the first line of the text document is different from this one, the machine tool shows this one.
It can be exported and imported. You first compile a paragraph manually, and then export it. Look at the format and write it according to this format, and you can import it.
It may be your input error: for example, when entering G92, you lose one more digit to become G922. It is also possible that there is indeed a G code that is not supported by the numerical control system, or the simulation software is different from the machine tool, which is supported by the machine tool but not supported by the simulation software. You can analyze it by looking at the program carefully.
Make sure that your computer is equipped with enough memory, storage space and processor performance to run the simulation software. There may be some software conflicts in the computer system. Try to update the software or uninstall other software to solve this problem. The computer has been infected with malware, causing the software to fail to work properly.
How to access niche export markets-APP, download it now, new users will receive a novice gift pack.
The system version is wrong. Yulong CNC machining simulation software v1 uses rules to show that it cannot be opened because the system version is wrong.Yulong CNC machining simulation software v1 is a simulation software that applies virtual reality technology to CNC machining operation skills training and assessment. It is a powerful simulation software.
When installing, the menu machine version, after the installation is completed, it needs to be cracked. Yulong can't keep up with the times, and most people are using Swo. For example, Yulong 7 can only run in XP and below systems, and cannot be used in win7 or above systems.
It may be installed incorrectly. In addition, Yulong has not been updated for a long time, and Win7 and above are not supported.
Compatibility problems, there will be no such problem when installed on a 32-bit operating system.
System failure. Yulong CNC simulation win10 cannot be opened due to system failure or the failure of related services. You can update the system again or select the safe mode in the advanced selection menu to open it.
After you install it, a folder of "CNC Simulation System" appears, which contains an icon like a phone. In general, it is difficult to click on it first, and then click another icon in the same folder to enter..
Use the Swo CNC simulation software, which displays the tool rail by default. As long as you enter the "automatic" mode, the tool track will be displayed.
The mastercam2021 knife track is not displayed because it is hidden. Solution: Press the Win key to open the start menu. Right-click Properties - in the taskbar - select to automatically hide the taskbar. Then check the locked taskbar.
Tool method: Put the method switch back to the reference point, and press the X, Y and Z direction keys respectively to make the machine tool return to the reference point operation. At this time, the screen will display the coordinates of the tool reference point in the machine tool coordinate system. If the origin of the machine tool coincides with the reference point, the coordinates are displayed as (0, 0, 0).
CNC lathe flankThe method of the system to see the tool trajectory diagram of the program on the screen: click the graphic, press the machine tool lock, spindle lock, and start the cycle.
I have versions 0 and 8 of Yulong CNC simulation system. 0 can be installed directly. After installation, copy the icon in crack to the installation directory (by the way, select the teacher's machine). After that, open the password lock (telephone icon) first, and then turn on the simulation system, and that's it.
If the program name in the first line of the text document is different from this one, the machine tool shows this one.
It can be exported and imported. You first compile a paragraph manually, and then export it. Look at the format and write it according to this format, and you can import it.
It may be your input error: for example, when entering G92, you lose one more digit to become G922. It is also possible that there is indeed a G code that is not supported by the numerical control system, or the simulation software is different from the machine tool, which is supported by the machine tool but not supported by the simulation software. You can analyze it by looking at the program carefully.
Make sure that your computer is equipped with enough memory, storage space and processor performance to run the simulation software. There may be some software conflicts in the computer system. Try to update the software or uninstall other software to solve this problem. The computer has been infected with malware, causing the software to fail to work properly.
Sourcing intelligence from customs data
author: 2024-12-23 22:59Lithium batteries HS code classification
author: 2024-12-23 22:58Trade data-driven competitive analysis
author: 2024-12-23 22:46HS code intelligence for oil and gas industry
author: 2024-12-23 22:42APAC HS code tariff reductions
author: 2024-12-23 22:20How to capitalize on trade incentives
author: 2024-12-23 22:15HS code-based forecasting for raw materials
author: 2024-12-23 21:12How to validate supplier compliance
author: 2024-12-23 20:58891.31MB
Check284.73MB
Check618.37MB
Check592.61MB
Check568.39MB
Check874.17MB
Check989.19MB
Check928.56MB
Check613.14MB
Check344.73MB
Check617.27MB
Check159.13MB
Check544.33MB
Check943.84MB
Check623.67MB
Check982.32MB
Check483.58MB
Check895.58MB
Check911.12MB
Check424.62MB
Check199.76MB
Check942.52MB
Check415.87MB
Check585.86MB
Check261.92MB
Check277.57MB
Check245.25MB
Check518.56MB
Check634.14MB
Check268.34MB
Check121.93MB
Check782.78MB
Check322.19MB
Check924.18MB
Check993.52MB
Check842.43MB
CheckScan to install
How to access niche export markets to discover more
Netizen comments More
2686 How to integrate IoT with trade data
2024-12-23 23:05 recommend
1296 HS code-based landed cost calculations
2024-12-23 23:01 recommend
1095 Industry-specific trade data filters
2024-12-23 22:07 recommend
694 Wheat (HS code ) import data
2024-12-23 21:58 recommend
2575 HS code-based trade data analytics
2024-12-23 20:36 recommend