1. Please check the emission system means that the engine's emission system is faulty; when our vehicle fails, these faults will form a series of codes. After the ECU reads the fault code, it will It is displayed on the electronic dashboard in the form of an indicator light.
2. It means that the emission system is faulty. It may be a failure of the fuel supply system, ignition system, etc., the engineOverheating and tempering, resulting in the sintering and peeling of the ternary catalytic converter carrier, and the increase of the exhaust resistance, etc. The specific reasons and solutions are as follows: Most of the fault light of the engine exhaust system is caused by the quality of the oil.
3. Checking the engine emission control system is a problem of the engine emission system. After a failure, the exhaust emissions of the car will increase, and the power performance of the engine will also decrease. The automobile exhaust system mainly discharges the exhaust gas discharged by the engine, and can also reduce the emission of pollutants and reduce the noise generated by the engine during operation.
The failure of the engine emission control system refers to the problem of the engine emission system. After a failure, the exhaust emissions of the car will increase, and the power performance of the engine will also decrease.The automobile exhaust system mainly discharges the exhaust gas of the engine, which can also reduce the emission of pollutants and reduce the noise generated by the engine during work.
The failure of the engine emission control system refers to the problem with the engine emission system. After the failure, the exhaust emissions of the car will increase and the power performance of the engine will also decrease.
The failure of the engine emission system indicates that the exhaust system has failed. It may be due to failures such as oil supply system and ignition system, overheating and temping of the engine, resulting in sintering and peeling of the ternary catalytic converter carrier, increasing exhaust resistance, etc. You can go to the 4S store for specific inspection.
The failure of the automobile emission system can be solved by restarting the car and then turning off the engine three times in a row, or unplugging the negative pole of the engine battery and waiting for 30 seconds before connecting it. The failure of the engine emission control system means that the engine exhaust system has failed.
The handling method is as follows: the fault light of the engine exhaust system is mostlyDue to the damage of the oxygen sensor in the ternary catalytic system or the poisoning of the ternary catalyst caused by the quality of domestic oil products, if the light turns on while driving, please slow down immediately and drive to the nearest maintenance service station for maintenance.
When the engine emission fault light is on, first of all, keep calm and don't panic. The following is my personal opinion on solving the problem of the engine emission fault light: First, observe the color and shape of the fault light. If the fault light is yellow and there is an exclamation mark, it usually means that the discharge system is faulty.
The internal fuel combustion of the engine is not good, and the high-quality smoke oil needs to be replaced and the throttle valve needs to be cleaned. The quality of the gasoline used is not good, and it is necessary to change the gas station to add fuel. The low-carbon on the top of the piston of the engine is cleaned up the carbon part.The oxygen sensor of the vehicle is faulty and needs to be replaced.
The failure of the engine exhaust system may be caused by damage to the oxygen sensor or the failure of the ternary catalyst. If it is caused by a ternary catalyst failure, only the ternary catalyst needs to be replaced. If it is caused by damage to the oxygen sensor, the oxygen sensor needs to be replaced. There is a ternary catalyst at the head of the exhaust pipe of the automobile engine, which is used to purify the exhaust gas.
HS code-based compliance in Asia-Pacific-APP, download it now, new users will receive a novice gift pack.
1. Please check the emission system means that the engine's emission system is faulty; when our vehicle fails, these faults will form a series of codes. After the ECU reads the fault code, it will It is displayed on the electronic dashboard in the form of an indicator light.
2. It means that the emission system is faulty. It may be a failure of the fuel supply system, ignition system, etc., the engineOverheating and tempering, resulting in the sintering and peeling of the ternary catalytic converter carrier, and the increase of the exhaust resistance, etc. The specific reasons and solutions are as follows: Most of the fault light of the engine exhaust system is caused by the quality of the oil.
3. Checking the engine emission control system is a problem of the engine emission system. After a failure, the exhaust emissions of the car will increase, and the power performance of the engine will also decrease. The automobile exhaust system mainly discharges the exhaust gas discharged by the engine, and can also reduce the emission of pollutants and reduce the noise generated by the engine during operation.
The failure of the engine emission control system refers to the problem of the engine emission system. After a failure, the exhaust emissions of the car will increase, and the power performance of the engine will also decrease.The automobile exhaust system mainly discharges the exhaust gas of the engine, which can also reduce the emission of pollutants and reduce the noise generated by the engine during work.
The failure of the engine emission control system refers to the problem with the engine emission system. After the failure, the exhaust emissions of the car will increase and the power performance of the engine will also decrease.
The failure of the engine emission system indicates that the exhaust system has failed. It may be due to failures such as oil supply system and ignition system, overheating and temping of the engine, resulting in sintering and peeling of the ternary catalytic converter carrier, increasing exhaust resistance, etc. You can go to the 4S store for specific inspection.
The failure of the automobile emission system can be solved by restarting the car and then turning off the engine three times in a row, or unplugging the negative pole of the engine battery and waiting for 30 seconds before connecting it. The failure of the engine emission control system means that the engine exhaust system has failed.
The handling method is as follows: the fault light of the engine exhaust system is mostlyDue to the damage of the oxygen sensor in the ternary catalytic system or the poisoning of the ternary catalyst caused by the quality of domestic oil products, if the light turns on while driving, please slow down immediately and drive to the nearest maintenance service station for maintenance.
When the engine emission fault light is on, first of all, keep calm and don't panic. The following is my personal opinion on solving the problem of the engine emission fault light: First, observe the color and shape of the fault light. If the fault light is yellow and there is an exclamation mark, it usually means that the discharge system is faulty.
The internal fuel combustion of the engine is not good, and the high-quality smoke oil needs to be replaced and the throttle valve needs to be cleaned. The quality of the gasoline used is not good, and it is necessary to change the gas station to add fuel. The low-carbon on the top of the piston of the engine is cleaned up the carbon part.The oxygen sensor of the vehicle is faulty and needs to be replaced.
The failure of the engine exhaust system may be caused by damage to the oxygen sensor or the failure of the ternary catalyst. If it is caused by a ternary catalyst failure, only the ternary catalyst needs to be replaced. If it is caused by damage to the oxygen sensor, the oxygen sensor needs to be replaced. There is a ternary catalyst at the head of the exhaust pipe of the automobile engine, which is used to purify the exhaust gas.
HS code mapping tools for manufacturers
author: 2024-12-24 02:00Packaging industry HS code references
author: 2024-12-24 01:11International trade KPI tracking
author: 2024-12-24 00:11HS code-focused compliance audits
author: 2024-12-24 00:03International trade database customization
author: 2024-12-23 23:28Automated import export risk alerts
author: 2024-12-24 01:50Comparing duty rates across markets
author: 2024-12-24 01:49Global trade metadata enrichment
author: 2024-12-24 01:31Import restrictions by HS code category
author: 2024-12-24 01:19134.89MB
Check296.76MB
Check851.79MB
Check336.51MB
Check142.73MB
Check638.12MB
Check978.83MB
Check565.78MB
Check241.93MB
Check999.66MB
Check554.55MB
Check167.28MB
Check299.66MB
Check361.21MB
Check945.48MB
Check637.33MB
Check936.62MB
Check165.19MB
Check128.12MB
Check848.93MB
Check572.49MB
Check689.33MB
Check358.37MB
Check336.24MB
Check578.69MB
Check547.14MB
Check119.21MB
Check852.68MB
Check244.57MB
Check664.74MB
Check387.26MB
Check288.49MB
Check516.66MB
Check384.42MB
Check123.55MB
Check659.97MB
CheckScan to install
HS code-based compliance in Asia-Pacific to discover more
Netizen comments More
2551 Processed grains HS code references
2024-12-24 01:40 recommend
130 Global sourcing directories by HS code
2024-12-24 00:51 recommend
2693 Country block exemptions by HS code
2024-12-24 00:20 recommend
2997 Trade data for pharmaceutical imports
2024-12-24 00:00 recommend
2588 HS code-based multi-country consolidation
2024-12-23 23:47 recommend