The detailed baking process is: every time the paint is applied to the substrate, it is sent to the dust-free constant temperature baking room for drying treatment, and so repeated three, four times or more. Four simple steps, primer, topcoat, transparent paint, waxing, and that's it.
The first step: First of all, choose the materials used. The materials and production processes of general lacquer furniture are basically the same as those of other wooden furniture. The frame of high-end lacquer products needs to be made of precious materials such as Nanmu, mahogany and rosewood, and carved with various exquisite patterns. Step 2: Apply gray. Apply ash.
Process: A. Baking paint: apply primer three times and topcoat four times on the substrate. Each time the paint is painted, it is sent to the dust-free temperature baking room for baking. B. Spray paint: Grind the tweed on the substrate, then spray paint on it, and dry it naturally.Paint film.
Transparent paint is processed, then transparent paint, and then waxing begins. Just like cars, coarse wax is first waxed with fine wax, which is the piano baking paint. Drying treatment. Each time the substrate is painted, it is sent to the dust-free constant temperature baking room for drying treatment, and so on. Repeat three, four or more times.
Painting. After filtering out the impurities, the raw paint is heated, stirred and dehydrated, which is the push-glush paint. Cashew paint is cashew shell oil with solvent and other chemical materials. After heating and chemicalizing in the reactor, it is a synthetic cashew paint. Paint it.
Cleaning, identification, evaluation and shielding After cleaning the whole car, identify the type of old coating, evaluate the degree of damage to the workpiece, and determine the repair process.Masking and deoiling Protect the area around the damaged part with masking paper, and de-oil the area that needs to be polished at the same time.
Spray several layers of paint on the base sanded to a certain degree of roughness (usually high-density plates). And it is shaped by high-temperature baking. At present, this process has high requirements for paint and good color rendering.
Cleaning: First, clean up the surface of the car comprehensively, remove dust and debris, and determine the maintenance process. Oiling: Oiling the area to be painted. Sanding: Choose the appropriate sandpaper to sand the part that needs to be painted, and be sure to grind all the paint flat.
After applying putty, the car can enter the baking room to spray colored paint. After baking, it needs to be sprayed with varnish, that is, glossy paint. The large parts that have been dismantled, such as the hood, bumper, etc., are also carrying out the above work simultaneously.Plastic mesh parts such as bumpers should be sprayed with plastic before painting.
The difference between baking paint and spray paint are: different operation methods, different material selection, different construction skills, different safety, and different cost.
The classification is different. Baking paint is divided into two categories. One type of low-temperature baking paint has a curing temperature of 140°C-180°C, and the other category is called high-temperature baking paint, and its curing temperature is 280°C-400°C. High-temperature baking paint, the full name in English is Polytetrafluoroethylene, abbreviated as Teflon, PTFE, F4, etc.
Car baking paint and ordinary spray paintThe differences are: from the process, the baking paint is to apply primer three times and four times the surface paint on the substrate. Each time the paint is painted, it is sent to the dust-free temperature baking room for baking; and the spray paint grinds the tweed on the substrate, and then sprays the paint on it to dry naturally.
Different processes. Baking paint is to apply primer three times and topcoat four times on the substrate. Each time the paint is painted, it is sent to the dust-free temperature baking room for baking. Spray paint is to grind the tweed on the substrate, and then spray paint on it and dry it naturally. Different paint films. The corners of the baked paint are smooth and the color is the same. It proves that the paint film is uniform and the color is full.
Generally speaking, the baking paint temperature of the original car paint is between 120℃ and 150℃. In this temperature rangeInside, the paint surface can achieve the ideal drying effect in a short time, so as to ensure the quality and appearance of the paint surface. Of course, the baking paint temperature may also be different for different car brands and models.
Between 130 degrees and 180 degrees, use a paint called cross-linked hardened paint. The car paint spray used when the vehicle leaves the factory is controlled by the computer, and the robotic arm is sprayed, which is very uniform and almost flawless.
Painting is the same in any season. Because most regular paint shops have professional baking shops, and the temperature of the baking room can also reach 50 or 60 degrees in winter, so painting is generally not affected by the season.
HS code compliance for Nordic countries-APP, download it now, new users will receive a novice gift pack.
The detailed baking process is: every time the paint is applied to the substrate, it is sent to the dust-free constant temperature baking room for drying treatment, and so repeated three, four times or more. Four simple steps, primer, topcoat, transparent paint, waxing, and that's it.
The first step: First of all, choose the materials used. The materials and production processes of general lacquer furniture are basically the same as those of other wooden furniture. The frame of high-end lacquer products needs to be made of precious materials such as Nanmu, mahogany and rosewood, and carved with various exquisite patterns. Step 2: Apply gray. Apply ash.
Process: A. Baking paint: apply primer three times and topcoat four times on the substrate. Each time the paint is painted, it is sent to the dust-free temperature baking room for baking. B. Spray paint: Grind the tweed on the substrate, then spray paint on it, and dry it naturally.Paint film.
Transparent paint is processed, then transparent paint, and then waxing begins. Just like cars, coarse wax is first waxed with fine wax, which is the piano baking paint. Drying treatment. Each time the substrate is painted, it is sent to the dust-free constant temperature baking room for drying treatment, and so on. Repeat three, four or more times.
Painting. After filtering out the impurities, the raw paint is heated, stirred and dehydrated, which is the push-glush paint. Cashew paint is cashew shell oil with solvent and other chemical materials. After heating and chemicalizing in the reactor, it is a synthetic cashew paint. Paint it.
Cleaning, identification, evaluation and shielding After cleaning the whole car, identify the type of old coating, evaluate the degree of damage to the workpiece, and determine the repair process.Masking and deoiling Protect the area around the damaged part with masking paper, and de-oil the area that needs to be polished at the same time.
Spray several layers of paint on the base sanded to a certain degree of roughness (usually high-density plates). And it is shaped by high-temperature baking. At present, this process has high requirements for paint and good color rendering.
Cleaning: First, clean up the surface of the car comprehensively, remove dust and debris, and determine the maintenance process. Oiling: Oiling the area to be painted. Sanding: Choose the appropriate sandpaper to sand the part that needs to be painted, and be sure to grind all the paint flat.
After applying putty, the car can enter the baking room to spray colored paint. After baking, it needs to be sprayed with varnish, that is, glossy paint. The large parts that have been dismantled, such as the hood, bumper, etc., are also carrying out the above work simultaneously.Plastic mesh parts such as bumpers should be sprayed with plastic before painting.
The difference between baking paint and spray paint are: different operation methods, different material selection, different construction skills, different safety, and different cost.
The classification is different. Baking paint is divided into two categories. One type of low-temperature baking paint has a curing temperature of 140°C-180°C, and the other category is called high-temperature baking paint, and its curing temperature is 280°C-400°C. High-temperature baking paint, the full name in English is Polytetrafluoroethylene, abbreviated as Teflon, PTFE, F4, etc.
Car baking paint and ordinary spray paintThe differences are: from the process, the baking paint is to apply primer three times and four times the surface paint on the substrate. Each time the paint is painted, it is sent to the dust-free temperature baking room for baking; and the spray paint grinds the tweed on the substrate, and then sprays the paint on it to dry naturally.
Different processes. Baking paint is to apply primer three times and topcoat four times on the substrate. Each time the paint is painted, it is sent to the dust-free temperature baking room for baking. Spray paint is to grind the tweed on the substrate, and then spray paint on it and dry it naturally. Different paint films. The corners of the baked paint are smooth and the color is the same. It proves that the paint film is uniform and the color is full.
Generally speaking, the baking paint temperature of the original car paint is between 120℃ and 150℃. In this temperature rangeInside, the paint surface can achieve the ideal drying effect in a short time, so as to ensure the quality and appearance of the paint surface. Of course, the baking paint temperature may also be different for different car brands and models.
Between 130 degrees and 180 degrees, use a paint called cross-linked hardened paint. The car paint spray used when the vehicle leaves the factory is controlled by the computer, and the robotic arm is sprayed, which is very uniform and almost flawless.
Painting is the same in any season. Because most regular paint shops have professional baking shops, and the temperature of the baking room can also reach 50 or 60 degrees in winter, so painting is generally not affected by the season.
HS code classification for electronics
author: 2024-12-23 22:57Global trade credit risk analysis
author: 2024-12-23 22:54How to enhance supplier collaboration
author: 2024-12-23 22:04Trade data solutions for wholesalers
author: 2024-12-23 21:38Industry-specific trade growth forecasts
author: 2024-12-23 20:29How to verify supplier credibility with data
author: 2024-12-23 22:31HS code tagging in ERP solutions
author: 2024-12-23 21:30Real-time customs inspection logs
author: 2024-12-23 21:05Marble and granite HS code references
author: 2024-12-23 20:28Industry-wise trade data breakdowns
author: 2024-12-23 20:21326.65MB
Check454.97MB
Check646.87MB
Check692.38MB
Check177.41MB
Check974.95MB
Check371.53MB
Check725.46MB
Check881.44MB
Check813.23MB
Check975.78MB
Check645.69MB
Check176.84MB
Check225.64MB
Check645.19MB
Check632.18MB
Check528.96MB
Check638.38MB
Check149.92MB
Check982.46MB
Check639.96MB
Check871.72MB
Check324.34MB
Check722.96MB
Check482.82MB
Check749.12MB
Check196.32MB
Check296.68MB
Check939.67MB
Check347.81MB
Check139.48MB
Check522.87MB
Check235.93MB
Check526.31MB
Check316.48MB
Check771.64MB
CheckScan to install
HS code compliance for Nordic countries to discover more
Netizen comments More
763 How to interpret complex trade patterns
2024-12-23 22:43 recommend
387 Industry-level trade feasibility studies
2024-12-23 22:04 recommend
1893 Global trade documentation standards
2024-12-23 21:47 recommend
2497 HS code analytics for niche markets
2024-12-23 21:39 recommend
1795 North American HS code tariff structures
2024-12-23 20:16 recommend