Fault of the camshaft position sensor line or engine control module. (2) The camshaft position sensor is damaged. (3) Engine timing failure. (4) The camshaft can be changed with timing failure.
Most of the cold start jitter is caused by poor combustion of fuel. There is too much glue moisture in the fuel tank, and too much carbon accumulation inside the engine. The cold start is not brought to the combustion chamber, and then mixed in the fuel tank is beaten into the combustion chamber. The shaking caused by poor combustion.
Too much carbon accumulation of throttle valves, fuel injectors and intake duct may be one of them, or it may be all. 2: When there is too much carbon accumulation inside the engine, the gasoline sprayed by the cold start fuel injection head will be absorbed by a large amount of carbon accumulation, resulting in the cold start mixture gas being too thin, causing the start to shake.
The causes of engine lack of cylinder fire can be divided into two categories: First, electronic control system failure, such as missing sensor signal or signal misalignation, control signal error or no signal output, spark plug or ignition coil damage resulting inability to ignite, fuel nozzle failure to inject fuel and line failure, etc.
Hello, in this case, it is recommended that you check the spark plug first. In general, it is caused by spark plugs and poor ignition.
Every car has a frame (chassis) number and engine number, both of which have positive meanings. Mercedes-Benz chassis numbers are divided into American version and non-American version. American version of Mercedes-Benz: Take WDBGA57E8NA000144 as an example. The 1-3rd WDB indicates that this car is a German car, where W represents Germany and DB represents Daimler-Benz.
This is the current M274 series engine of Mercedes-Benz.The latest model belongs to the 0T high-power version, with a maximum power of 155kw and a maximum torque of 350Nm.
This is the frame number of the vehicle. From the frame number, it can be seen that the production site of the car is Germany, and it can be seen that the year of production of the car is 2014.
There is also a number on the nameplate of the car. The clearest frame number is in the lower right corner of the windshield (looking at the car). On September 27, 2012, the official website of Mercedes-Benz (China) announced the launch of the new Mercedes-Benz E200 Coupe two-door coupe, with an official guide price of 580,000 yuan.
Take the domestic 2007 Mercedes-Benz E-class as an example, which is equipped with four different engines. The details are as follows: 2007 E200K elegant model, official guide price: 480,000Yuan, equipped with an 8-liter in-line 4-cylinder turbocharged engine, matched with a 5-speed automatic manual transmission, with a maximum power of 135KW and a maximum torque of 250N·m.
Most of the body numbers are on the body, and this model is even more different. Some are on the inside of the hood, some are on the side of the cab, and some have large beams on the beams. Generally, a small car has a vehicle identification code under the windshield in front of the car, which is the body number. This is used for checking the car and cannot be printed.
There are also some differences between Mercedes-Benz E200 and E300 in terms of power and suspension system.
The power of the two cars is different. The e300 uses a high-power version of the 0-liter turbocharged engine, and the e200 uses a low-power version of the 0-liter turbocharged engine.Mercedes-Benz e is a medium-sized and large limousine under Mercedes-Benz. The benchmark models of this car are BMW 5 Series, Audi a6l, etc.
e200 uses a low-power version of the 0-liter turbocharged engine, and the e300 uses a high-power version of the 0-liter turbocharged engine. The e300 model has stronger power and higher configuration, and of course the price is also more expensive. There is no e200 model in the new e-class. The entry-level model of the new e-class is e260.
1. The interior space of Mercedes-Benz e200 is also extremely excellent. It adopts an intelligent cockpit, built-in multimedia system, constant speed cruise system, automatic air conditioning system, giving people Bring a more luxurious feeling.In addition, its space is also very spacious, which is enough to meet the travel needs of passengers.
2. Excellent power performance. Mercedes-Benz e200 is equipped with a 5T turbocharged engine, with a maximum power of 163 horsepower and a maximum torque of 260 Nm. It only takes 9 seconds to accelerate to 0-100km/h. At the same time, the comprehensive fuel consumption of this car is only 2 liters per 100 kilometers, which is very fuel-saving. .
3. The reason why the Mercedes-Benz e200 is discontinued is that the high-speed power is weak, the noise is loud, the sound insulation is poor, and the rear row space is small. Detailed introduction 1 The low-speed power of the Mercedes-Benz e200's low-power 20T turbocharged engine is only 184 horsepower, and the acceleration to 100 kilometers is 88 seconds. 2 The noise is loud and the sound insulation is poor. The engine is used as a vehicle. The "heart" affects the normality of the vehicle.
4. The interior space of the Mercedes-Benz e200 coupe is very spacious and full of luxurious atmosphere.The interior is made of soft leather, and the seats are made of genuine leather, and are equipped with intelligent functions such as panoramic sunroof, high-end audio, central control LCD display, adaptive cruise and 360-degree panoramic monitoring, which meets the various needs of consumers.
1. The main differences between Mercedes-Benz E200L and E300L (taking the 2019 model as an example) are as follows: the first is Although the two cars are equipped with 0T inline 4-cylinder turbocharged engines, the tuning is different. E200L is a low-power version and E300L is a high-power version.
2. The difference between Mercedes-Benz E200L and Mercedes-Benz E300L lies in price and power.In terms of price: The price of 19 models of e200l is about 4.58 million yuan, and the high price is about 4.8 million yuan. The e300l also has two configurations and two versions, with a low price of about 4.58 million and a high price of about 4.28 million. On average, e300l is 30,000-40,000 more expensive than e200l.
3. The difference between Mercedes-Benz E200L and Mercedes-Benz E300L is the price and power. In terms of price: There are two models of the 19 e200l, with a low-end price of about 4.58 million and a high-end price of about 4.8 million. The e300l also has two configurations and two versions. The low-configuration price is about 4.58 million yuan, and the high-configuration price is about 4.28 million yuan.
4. The maximum power of the e200l engine is different from that of the e300l engine, the price is different, and the configuration is also different. AndThe maximum horsepower of the 200l engine is 184 horsepower, and the maximum horsepower of the e300l engine is 245 horsepower.
1. The powertrain of the two cars is different. The e260 is equipped with a 5-liter turbocharged engine and an electric motor, and the e200 is equipped with a 0-liter turbocharged engine. . The gearboxes used by these two cars are the same, both of which are 9-speed manual and automatic transmissions.
2. The engine power of the e260 is similar to that of the e200, but the e260 has a 48v light hybrid system compared with the e200. Of course, the power of the E260 is a little stronger than that of the e200. The new Mercedes-Benz e260 still adopts a 5t engine and is equipped with a 48v light hybrid system.The 5-liter turbocharged engine of the E260 has a maximum torque of 184 horsepower and 280 Nm.
3. The new Mercedes-Benz e does not have an e200 model. Only the old Mercedes-Benz e has an e200 model. The engine power of the e260 is the same as that of the e200, but the e260 has more 48v light hybrid system than the e200, so the power of the er260 is stronger than that of the e200. The new Mercedes-Benz e260 still uses a 5t engine equipped with a 48v light hybrid system.
4. The engine difference between the Mercedes-Benz E200 and the 260 is different. In terms of maximum speed and fuel consumption, the shape is different. The powertrain of the two cars is different. The e260 is equipped with a 15-liter turbocharged engine and electric motor, and the e200 is equipped with a 20-liter turbocharged engine. The two cars use variable speeds. The boxes are all the same, all 9-speed automatic manual transmission.
5. The following is the difference between Mercedes-Benz e200 and e260: Appearance: (1) The tail logo of the two is the most obvious, one is E200 and the other is E260. ( 2) The hubs of the two are also different. The hubs of the e200 are slightly ordinary with double five hubs, while the e260 has two types of hubs, one with five stars and the other with multiple hubs.
6. The power is different. The price difference between the E200 and the E260 is tens of thousands of yuan, but the models of the two models are completely different. Most people will think that the E260 is equipped with a larger and more high-end engine. In terms of power and displacement, Mercedes-Benz E200 and E260 both use a 0-liter inline 4-cylinder turbocharged engine.
*
How to manage cross-border complexity-APP, download it now, new users will receive a novice gift pack.
Fault of the camshaft position sensor line or engine control module. (2) The camshaft position sensor is damaged. (3) Engine timing failure. (4) The camshaft can be changed with timing failure.
Most of the cold start jitter is caused by poor combustion of fuel. There is too much glue moisture in the fuel tank, and too much carbon accumulation inside the engine. The cold start is not brought to the combustion chamber, and then mixed in the fuel tank is beaten into the combustion chamber. The shaking caused by poor combustion.
Too much carbon accumulation of throttle valves, fuel injectors and intake duct may be one of them, or it may be all. 2: When there is too much carbon accumulation inside the engine, the gasoline sprayed by the cold start fuel injection head will be absorbed by a large amount of carbon accumulation, resulting in the cold start mixture gas being too thin, causing the start to shake.
The causes of engine lack of cylinder fire can be divided into two categories: First, electronic control system failure, such as missing sensor signal or signal misalignation, control signal error or no signal output, spark plug or ignition coil damage resulting inability to ignite, fuel nozzle failure to inject fuel and line failure, etc.
Hello, in this case, it is recommended that you check the spark plug first. In general, it is caused by spark plugs and poor ignition.
Every car has a frame (chassis) number and engine number, both of which have positive meanings. Mercedes-Benz chassis numbers are divided into American version and non-American version. American version of Mercedes-Benz: Take WDBGA57E8NA000144 as an example. The 1-3rd WDB indicates that this car is a German car, where W represents Germany and DB represents Daimler-Benz.
This is the current M274 series engine of Mercedes-Benz.The latest model belongs to the 0T high-power version, with a maximum power of 155kw and a maximum torque of 350Nm.
This is the frame number of the vehicle. From the frame number, it can be seen that the production site of the car is Germany, and it can be seen that the year of production of the car is 2014.
There is also a number on the nameplate of the car. The clearest frame number is in the lower right corner of the windshield (looking at the car). On September 27, 2012, the official website of Mercedes-Benz (China) announced the launch of the new Mercedes-Benz E200 Coupe two-door coupe, with an official guide price of 580,000 yuan.
Take the domestic 2007 Mercedes-Benz E-class as an example, which is equipped with four different engines. The details are as follows: 2007 E200K elegant model, official guide price: 480,000Yuan, equipped with an 8-liter in-line 4-cylinder turbocharged engine, matched with a 5-speed automatic manual transmission, with a maximum power of 135KW and a maximum torque of 250N·m.
Most of the body numbers are on the body, and this model is even more different. Some are on the inside of the hood, some are on the side of the cab, and some have large beams on the beams. Generally, a small car has a vehicle identification code under the windshield in front of the car, which is the body number. This is used for checking the car and cannot be printed.
There are also some differences between Mercedes-Benz E200 and E300 in terms of power and suspension system.
The power of the two cars is different. The e300 uses a high-power version of the 0-liter turbocharged engine, and the e200 uses a low-power version of the 0-liter turbocharged engine.Mercedes-Benz e is a medium-sized and large limousine under Mercedes-Benz. The benchmark models of this car are BMW 5 Series, Audi a6l, etc.
e200 uses a low-power version of the 0-liter turbocharged engine, and the e300 uses a high-power version of the 0-liter turbocharged engine. The e300 model has stronger power and higher configuration, and of course the price is also more expensive. There is no e200 model in the new e-class. The entry-level model of the new e-class is e260.
1. The interior space of Mercedes-Benz e200 is also extremely excellent. It adopts an intelligent cockpit, built-in multimedia system, constant speed cruise system, automatic air conditioning system, giving people Bring a more luxurious feeling.In addition, its space is also very spacious, which is enough to meet the travel needs of passengers.
2. Excellent power performance. Mercedes-Benz e200 is equipped with a 5T turbocharged engine, with a maximum power of 163 horsepower and a maximum torque of 260 Nm. It only takes 9 seconds to accelerate to 0-100km/h. At the same time, the comprehensive fuel consumption of this car is only 2 liters per 100 kilometers, which is very fuel-saving. .
3. The reason why the Mercedes-Benz e200 is discontinued is that the high-speed power is weak, the noise is loud, the sound insulation is poor, and the rear row space is small. Detailed introduction 1 The low-speed power of the Mercedes-Benz e200's low-power 20T turbocharged engine is only 184 horsepower, and the acceleration to 100 kilometers is 88 seconds. 2 The noise is loud and the sound insulation is poor. The engine is used as a vehicle. The "heart" affects the normality of the vehicle.
4. The interior space of the Mercedes-Benz e200 coupe is very spacious and full of luxurious atmosphere.The interior is made of soft leather, and the seats are made of genuine leather, and are equipped with intelligent functions such as panoramic sunroof, high-end audio, central control LCD display, adaptive cruise and 360-degree panoramic monitoring, which meets the various needs of consumers.
1. The main differences between Mercedes-Benz E200L and E300L (taking the 2019 model as an example) are as follows: the first is Although the two cars are equipped with 0T inline 4-cylinder turbocharged engines, the tuning is different. E200L is a low-power version and E300L is a high-power version.
2. The difference between Mercedes-Benz E200L and Mercedes-Benz E300L lies in price and power.In terms of price: The price of 19 models of e200l is about 4.58 million yuan, and the high price is about 4.8 million yuan. The e300l also has two configurations and two versions, with a low price of about 4.58 million and a high price of about 4.28 million. On average, e300l is 30,000-40,000 more expensive than e200l.
3. The difference between Mercedes-Benz E200L and Mercedes-Benz E300L is the price and power. In terms of price: There are two models of the 19 e200l, with a low-end price of about 4.58 million and a high-end price of about 4.8 million. The e300l also has two configurations and two versions. The low-configuration price is about 4.58 million yuan, and the high-configuration price is about 4.28 million yuan.
4. The maximum power of the e200l engine is different from that of the e300l engine, the price is different, and the configuration is also different. AndThe maximum horsepower of the 200l engine is 184 horsepower, and the maximum horsepower of the e300l engine is 245 horsepower.
1. The powertrain of the two cars is different. The e260 is equipped with a 5-liter turbocharged engine and an electric motor, and the e200 is equipped with a 0-liter turbocharged engine. . The gearboxes used by these two cars are the same, both of which are 9-speed manual and automatic transmissions.
2. The engine power of the e260 is similar to that of the e200, but the e260 has a 48v light hybrid system compared with the e200. Of course, the power of the E260 is a little stronger than that of the e200. The new Mercedes-Benz e260 still adopts a 5t engine and is equipped with a 48v light hybrid system.The 5-liter turbocharged engine of the E260 has a maximum torque of 184 horsepower and 280 Nm.
3. The new Mercedes-Benz e does not have an e200 model. Only the old Mercedes-Benz e has an e200 model. The engine power of the e260 is the same as that of the e200, but the e260 has more 48v light hybrid system than the e200, so the power of the er260 is stronger than that of the e200. The new Mercedes-Benz e260 still uses a 5t engine equipped with a 48v light hybrid system.
4. The engine difference between the Mercedes-Benz E200 and the 260 is different. In terms of maximum speed and fuel consumption, the shape is different. The powertrain of the two cars is different. The e260 is equipped with a 15-liter turbocharged engine and electric motor, and the e200 is equipped with a 20-liter turbocharged engine. The two cars use variable speeds. The boxes are all the same, all 9-speed automatic manual transmission.
5. The following is the difference between Mercedes-Benz e200 and e260: Appearance: (1) The tail logo of the two is the most obvious, one is E200 and the other is E260. ( 2) The hubs of the two are also different. The hubs of the e200 are slightly ordinary with double five hubs, while the e260 has two types of hubs, one with five stars and the other with multiple hubs.
6. The power is different. The price difference between the E200 and the E260 is tens of thousands of yuan, but the models of the two models are completely different. Most people will think that the E260 is equipped with a larger and more high-end engine. In terms of power and displacement, Mercedes-Benz E200 and E260 both use a 0-liter inline 4-cylinder turbocharged engine.
*Data-driven supply chain partnerships
author: 2024-12-23 23:09How to analyze trade seasonality
author: 2024-12-23 22:20How to comply with EU trade regulations
author: 2024-12-23 21:48Medical reagents HS code verification
author: 2024-12-23 21:08HS code mapping for infant formula imports
author: 2024-12-23 21:00Wine and spirits HS code verification
author: 2024-12-23 23:21Predictive supply chain resilience
author: 2024-12-23 23:14Trade data for market diversification
author: 2024-12-23 22:45HS code filtering for restricted items
author: 2024-12-23 22:27HS code-based container stowage planning
author: 2024-12-23 21:45
import export database
377.69MB
Check
HS code mapping in government tenders
428.37MB
Check
Predictive analytics for trade flows
947.42MB
Check
HS code-driven differentiation strategies
934.42MB
Check
Metal scrap HS code classification
171.43MB
Check
Trade data for metal commodities
964.44MB
Check
Raw materials HS code intelligence
867.33MB
Check
Industrial lubricants HS code classification
793.79MB
Check
How to improve trade compliance
383.82MB
Check
Food processing HS code insights
916.39MB
Check
How to reduce documentation errors
832.85MB
Check
Canada shipment tracking services
647.21MB
Check
HS code-based compliance cost reduction
189.32MB
Check
Global trade resource libraries
182.65MB
Check
Timber and wood products HS code trends
153.76MB
Check
International trade compliance dictionary
838.17MB
Check
Export packaging standards by HS code
834.26MB
Check
Global trade data-driven asset utilization
588.64MB
Check
international trade research
293.53MB
Check
global trade intelligence
826.48MB
Check
HS code-driven market penetration analysis
222.85MB
Check
HS code integration with supply chain
269.59MB
Check
HS code intelligence in freight auditing
973.92MB
Check
Trade data for regulatory compliance
597.17MB
Check
Textile yarn HS code mapping
446.34MB
Check
Trade data for intellectual property checks
284.78MB
Check
HS code-focused compliance audits
923.29MB
Check
How to adapt to shifting trade policies
567.44MB
Check
HS code mapping to logistics KPIs
569.54MB
Check
How to use HS codes for tariff predictions
698.71MB
Check
Import export compliance audits
994.73MB
Check
Bespoke trade data dashboards
545.36MB
Check
How to benchmark HS code usage
319.43MB
Check
importers and exporters
878.75MB
Check
How to navigate non-tariff barriers
283.21MB
Check
Trade data for construction materials
244.27MB
Check
Scan to install
How to manage cross-border complexity to discover more
Netizen comments More
2290 How to build a trade data strategy
2024-12-23 23:22 recommend
2536 HS code-based predictive analytics
2024-12-23 23:01 recommend
2448 Fish and seafood HS code mapping
2024-12-23 22:08 recommend
877 HS code-focused compliance audits
2024-12-23 21:58 recommend
1514 Dried fruits HS code classification
2024-12-23 20:39 recommend