Insightful trade route analysis

List of contents of this article:

• 1, Does the car's disassembly of the thermosulator affect the engine?
• 2 、Where is the thermostat
• 3, What is a thermost?

Does the car's disassembly of the thermosulator affect the engine?

1. Damage to the thermosulator will cause the engine temperature to be too high or too low, affecting the operation of the engine. This may cause the electronic fan to rotate at high speed or the engine warm up slowly, which will increase fuel consumption. The impact of the disassembly of the thermostat is as follows: car jointAfter the thermoser is removed, the temperature cannot be sensed when starting in cold weather, resulting in the cold start of the engine and accelerating the wear of the engine.

2. The disassembly of the car thermoster will have the following effects on the vehicle: After removing the car thermoster, the temperature cannot be perceived when starting the vehicle in cold weather, resulting in the cold start of the engine and accelerating the wear of the engine. Starting the engine at low temperature will reduce the fuel efficiency of the engine and increase the fuel consumption.

3. The disassembly of the car thermoster will have the following effects: After removing the thermos, if the car is started in cold weather, the temperature will not be perceived, resulting in the cold start of the engine, which will accelerate the wear of the engine. When the engine is started at low temperature, the fuel efficiency of the engine will be reduced, which will increase fuel consumption.

4. The impact includes: the water temperature of the vehicle does not reach the normal value.Accelerate the wear inside the engine. In winter, the warm air of motor vehicles cannot be used normally. The thermoster plays a very important role in the engine, which is related to whether the warm air system of the vehicle can be used normally.

5. The vast majority of car owners only know that the water temperature will not be high after the theresulator is dismantled, but they do not know the harm to the vehicle after the theresulator is dismantled: the engine is not equipped with a thermosulator. In summer, because the temperature is relatively high, it will not have much impact on the engine itself. In winter, it is the first time. When the thermosulator plays the greatest role.

6. Disassembly of the thermosulator has an impact. The car thermoster is a valve that controls the flow path of engine coolant. It automatically adjusts the amount of water entering the radiator according to the temperature of the cooling water to ensure that the engine works within the appropriate temperature range, which can save energy consumption and other roles.

Where is the thermostat

1. The thermostat is installed in the pipe between the sewer pipe and the engine interface. The thermoster is a valve that controls the flow path of coolant. It is an automatic temperature control device that usually contains temperature-sensitive components to turn on and off the flow of air, gas or liquid by thermal expansion or cold contraction.

2. The car thermostat is at the water inlet of the engine water pump, as shown in the figure below: the thermostat must be maintained in good working condition, otherwise it will seriously affect the normal operation of the engine.

3. The position of the thermoster is the inlet of the engine water pump. The car thermoster is at the water inlet of the engine water pump. Centrifugal pumps are widely used in automobiles. Its basic structure is composed of a water pump shell, a connecting disc or a belt pulley, a water pump shaft and a bearing or bearing, a water pump impeller and a water seal device, etc., which is the main part of the automobile.

4. Generally speaking, car thermostators are installed on the engine and are usually located at the interface of the inlet pipe. Specifically, the thermostat is usually installed between the engine intake manifold and the inlet pipe, or between the engine inlet pipe and the radiator.

5. The thermoster is on the water supply pipe of the engine. If you disassemble the water supply pipe of the engine, you can see it. The thermostat must be in good technical condition, otherwise it will seriously affect the normal operation of the engine.

What is a thermost?

The car thermoster is a device for automatic temperature control, which is also equipped with a temperature-sensitive component to control the main valve and secondary valve of the thermosther according to the temperature of the cooling liquid. By automatically adjusting the amount of water entering the radiator, the heat dissipation capacity of the cooling system is well guaranteed.

Car thermoster refers to the valve that controls the flow path of engine coolant. Function. The thermostat must be kept in good working condition, otherwise it will seriously affect the normal operation of the engine.

The thermostat is a valve that controls the flow path of coolant. It is an automatic adjustment device that usually contains temperature-sensitive elements to control the flow of the liquid by controlling the opening and closing of the valve.

Car thermoster is a valve that controls the flow path of engine coolant. Location: The car thermoster is at the water inlet of the engine water pump.