2. The Focus 6 model adopts a 6-liter naturally aspirated engine from Ford products, with a maximum power of 107 horsepower and a peak torque of 145 Nm. Its power performance is excellent. It has good acceleration performance and economy in actual driving, which can meet the vast The driving needs of most consumers.
3. Four cylinders. According to Youjia, the 6L engine of the new Focus is already made in Chang'an Ford, code-named C6. This engine is a non-pressurized direct injection four-cylinder engine. It is a simplified version of the Ford 6LEcoboost supercharged direct injection engine, and the supercharger is removed.
4. Ford Focus is also equipped with 6LDragonTiVCT self-aspirated engine and 6LDragonThe GTDI turbocharged engine is matched with 6MT/6AT and 8AT gearboxes respectively. Focus is a car brand under Ford Motor Company in the United States, mainly producing family cars, SUVs, trucks and other models.
1. The engine used by the Fox 6 displacement model is the ti-vct engine. The engine of this model is made in Chang'an Ford. The code name is c6, which is a direct injection four-cylinder engine without supercharging effect.
2. Focus's 6Ti-VCT engine comes from Ford's 1995 Sigma engine. The engine is a double overhead camshaft (DOHC) in-line four-cylinder. The displacement is from 25 liters to 7 liters.
3. The new 6LTiVCT engine adopted by the new Focus is equipped with a dual variable door timing system. The power parameters are roughly at a maximum power of 92kw and a maximum torque of 152Nm, which is very close to the current 8L displacement of Chang'an Ford CAF483Q0 engine power output.But the fuel consumption is much lower than that of the 8L model.
4. Yes, the engine of the 17 Fox 6 is generally very good. It can reach more than 170 horsepower, which is completely sufficient in terms of power. Secondly, the biggest advantage of the naturally aspirated engine of 6 is that it is of good quality and stability. In addition, this engine is not picky about food, whether it is No. 92 gasoline or No. 95 gasoline.
In terms of body size, the length, width and height of the Ford Focus 2012 sedan are 4552mm/1823mm/1493mm, and the wheelbase is 2648mm. . The body length is 245mm higher than that of the previous two-box models, and the wheelbase is also increased by 52mm. Compared with models of the same class, its body size has obvious advantages.
In terms of appearance, the length, width and height of the 2012 new Fox sedan are 4530mm, 1823mm and 1468mm respectively. The wheelbase is 2619mm, the front suspension is 1550mm, and the rear suspension is 1577mm. The exterior design style of the whole vehicle is fashionable and dynamic. It adopts Ford's latest family-style front face design, which has a very high degree of recognition.
The front and rear wheelbases of the new Focus are 1553mm and 1544mm respectively, which is 18mm more than the 1535mm front wheelbase of the current model, and 11mm more than the rear wheelbase of 1531mm. Theoretically speaking, the lengthening of the new wheelbase means that the vehicle will be more stable when driving. This Goodyear Assurance Fuel Max Chinese used by Dingxin Fox.
Power configuration: The Focus sedan adopts Ford's most advanced powertrain, of which the 5L naturally aspirated engine has a performance comparable to that of a 0L self-aspirated engine, with a maximum horsepower of 118 horsepower and a peak torque of 146 Nm, and a 6-speed manual or 6-speed automatic transmission.
In terms of body size, the length, width and height of the new Focus are 4358/1823/1483 mm respectively, and the wheelbase is 2648 mm. The roof of the car adopts a streamlined design, and there is a small fin-shaped design above the roof.
Data-driven trade partner selection-APP, download it now, new users will receive a novice gift pack.
2. The Focus 6 model adopts a 6-liter naturally aspirated engine from Ford products, with a maximum power of 107 horsepower and a peak torque of 145 Nm. Its power performance is excellent. It has good acceleration performance and economy in actual driving, which can meet the vast The driving needs of most consumers.
3. Four cylinders. According to Youjia, the 6L engine of the new Focus is already made in Chang'an Ford, code-named C6. This engine is a non-pressurized direct injection four-cylinder engine. It is a simplified version of the Ford 6LEcoboost supercharged direct injection engine, and the supercharger is removed.
4. Ford Focus is also equipped with 6LDragonTiVCT self-aspirated engine and 6LDragonThe GTDI turbocharged engine is matched with 6MT/6AT and 8AT gearboxes respectively. Focus is a car brand under Ford Motor Company in the United States, mainly producing family cars, SUVs, trucks and other models.
1. The engine used by the Fox 6 displacement model is the ti-vct engine. The engine of this model is made in Chang'an Ford. The code name is c6, which is a direct injection four-cylinder engine without supercharging effect.
2. Focus's 6Ti-VCT engine comes from Ford's 1995 Sigma engine. The engine is a double overhead camshaft (DOHC) in-line four-cylinder. The displacement is from 25 liters to 7 liters.
3. The new 6LTiVCT engine adopted by the new Focus is equipped with a dual variable door timing system. The power parameters are roughly at a maximum power of 92kw and a maximum torque of 152Nm, which is very close to the current 8L displacement of Chang'an Ford CAF483Q0 engine power output.But the fuel consumption is much lower than that of the 8L model.
4. Yes, the engine of the 17 Fox 6 is generally very good. It can reach more than 170 horsepower, which is completely sufficient in terms of power. Secondly, the biggest advantage of the naturally aspirated engine of 6 is that it is of good quality and stability. In addition, this engine is not picky about food, whether it is No. 92 gasoline or No. 95 gasoline.
In terms of body size, the length, width and height of the Ford Focus 2012 sedan are 4552mm/1823mm/1493mm, and the wheelbase is 2648mm. . The body length is 245mm higher than that of the previous two-box models, and the wheelbase is also increased by 52mm. Compared with models of the same class, its body size has obvious advantages.
In terms of appearance, the length, width and height of the 2012 new Fox sedan are 4530mm, 1823mm and 1468mm respectively. The wheelbase is 2619mm, the front suspension is 1550mm, and the rear suspension is 1577mm. The exterior design style of the whole vehicle is fashionable and dynamic. It adopts Ford's latest family-style front face design, which has a very high degree of recognition.
The front and rear wheelbases of the new Focus are 1553mm and 1544mm respectively, which is 18mm more than the 1535mm front wheelbase of the current model, and 11mm more than the rear wheelbase of 1531mm. Theoretically speaking, the lengthening of the new wheelbase means that the vehicle will be more stable when driving. This Goodyear Assurance Fuel Max Chinese used by Dingxin Fox.
Power configuration: The Focus sedan adopts Ford's most advanced powertrain, of which the 5L naturally aspirated engine has a performance comparable to that of a 0L self-aspirated engine, with a maximum horsepower of 118 horsepower and a peak torque of 146 Nm, and a 6-speed manual or 6-speed automatic transmission.
In terms of body size, the length, width and height of the new Focus are 4358/1823/1483 mm respectively, and the wheelbase is 2648 mm. The roof of the car adopts a streamlined design, and there is a small fin-shaped design above the roof.
UK trade data management software
author: 2024-12-24 00:07Pharma supply chain HS code checks
author: 2024-12-23 23:47How to manage cross-border complexity
author: 2024-12-23 23:00USA trade data aggregation services
author: 2024-12-23 22:21Supplier relationship management with trade data
author: 2024-12-24 00:32HS code-based cargo consolidation tools
author: 2024-12-24 00:01How to integrate trade data with RPA
author: 2024-12-23 23:40USA trade data aggregation services
author: 2024-12-23 22:41Global HS code repository access
author: 2024-12-23 22:33397.83MB
Check719.34MB
Check971.71MB
Check142.93MB
Check899.24MB
Check641.11MB
Check443.22MB
Check726.69MB
Check922.35MB
Check462.48MB
Check681.52MB
Check659.31MB
Check543.53MB
Check917.93MB
Check524.93MB
Check975.52MB
Check276.36MB
Check484.48MB
Check546.48MB
Check128.36MB
Check942.21MB
Check756.67MB
Check892.33MB
Check774.95MB
Check846.44MB
Check357.75MB
Check921.12MB
Check679.68MB
Check649.12MB
Check664.81MB
Check196.94MB
Check711.12MB
Check759.23MB
Check629.86MB
Check596.13MB
Check776.25MB
CheckScan to install
Data-driven trade partner selection to discover more
Netizen comments More
1967 Minimizing duties via HS code optimization
2024-12-23 23:27 recommend
1224 How to find reliable global suppliers
2024-12-23 23:06 recommend
704 HS code-based opportunity in emerging economies
2024-12-23 22:50 recommend
2012 How to find HS code data for specific countries
2024-12-23 22:32 recommend
456 Comparative supplier performance data
2024-12-23 22:30 recommend