1. It is the gasket of the oil radiator that is damaged or aging.The black impurities in the expansion tank are caused by the damage or aging of the gasket of the oil radiator. As a result, the water pipe is connected to the oil channel, the engine oil is mixed with the antifreeze, or the cylinder pad may be broken. Just go to the repair shop to check the cylinder pad and remove the bar head.
2. When the radiator tube is blocked by impurities, oil and scale, the cooling system will be blocked and the coolant temperature will be too high. The easiest way is to apply a layer of soap, wrap it with tape, and then tie it with wire or thin rope to prevent the antifreeze from leaking out. In this way, you can drive to the repair point to replace a new one.
3. Add coolant according to the specifications. Turn on the ignition switch, connect the vehicle diagnostic instrument, select "Start HEV electric water pump" to exhaust the air in the system. Check again whether the coolant level reaches the upper mark "MAX" of the low-temperature expansion tank, and add coolant if necessary.
4. The reasons are: the antifreeze is added too much and the expansion of the water, the antifreeze is mixed into petroleum products, causing the water, overheating and the water. If the antifreeze is added too much, it will expand and turn the water.
1. The radiator tank of this car is in the front of the car, the expansion tank is in the engine compartment, and the expansion tank is a white translucent jar. Most cars use water-cooled engines, which rely on the continuous circulation of coolant in the engine to take away heat.
2. Under the head cover of the car. Jac Junling v6 has a water tank. The automobile water tank, also known as the radiator, is the main part of the automobile cooling system. The water tank is an important part of the water-cooled engine. As an important component of the heat dissipation circuit of the water-cooled engine, it can absorb the heat of the cylinder block.
3. First, open the hood. The white transparent container in the upper left is the expansion tank. Check the pipe connection of the expansion tank. If there is no abnormality, find the expansion pot replenishment pipe and remove the old replenishment pipe. Finally, put in a new water replenishment tube, tighten it, and seal it.
The car expansion tank is filled with coolant. Coolant, the full name should be called antifreeze coolant, which means coolant with antifreeze function. Antifreeze can prevent the coolant from freezing and cracking the radiator and freezing the engine cylinder when parking in the cold season. Antifreeze is not only used in winter, but should be used all year round.
The expansion tank is a container made of steel plate welding, with various sizes and specifications. The expansion tank is usually connected to the following pipes: (1) Expansion tube, which transfers the volume of water in the system increased by heating and expansion to the expansion tank (connected to the return water trunk). ( 2) The overflow pipe is used to drain the excess water in the water tank that exceeds the specified water level.
The expansion tank is an important part of the HVAC system. Its function is to shelter and compensate for the expansion and contraction of water in the system, and it is also used for system water supply.Generally, the expansion tank is located at the highest point of the system, and it is usually connected to the return water trunk pipe near the suction port of the circulating water pump (central air conditioning frozen water circulating water pump).
The automobile expansion box is a coolant storage box that ensures that the radiator is full of coolant, so that the coolant in the radiator has space to be released when it expands under heat, has a compensation capacity when cooling and shrinks, and has a certain amount of excess water to avoid water shortage.
Function: The expansion tank is an important part of the HVAC system. It accommodates the expansion of the system water in the heating system, and also plays the role of constant pressure and replenishing water for the system. The expansion tank can also stabilize the pressure of the system and exclude the air released by water during the heating process.
1. The car using a water-cooled engine has a water tank. The car that uses a water-cooled engine has a heat sink and an expansion tank. The heat sink is in the front of the car, and the expansion tank is in the engine compartment. The water-cooled engine relies on the continuous circulation of antifreeze in the engine to dissipate heat.
2. The car has a water tank, and the car water tank is indispensable for the car.The automobile water tank is the main part of the automobile cooling system. The coolant in the automobile water tank can absorb the heat of the cylinder block and prevent the engine from overheating. Simply put, it has the function of cooling the car and dissipating heat.
3. The car water tank is under the hood of the vehicle. The car water tank is located under the hood of the vehicle. When you open the hood, you can see the water tank cover. There is generally a warning word "high temperature danger" on the water tank cover, which is equipped with antifreeze.
Hello, there is a cover at the door twist above the co-driver's door of the cab. Open it. With Pepsi bottle, you'd better add a little detergent to the water, so that the wiper and glass friction coefficient will be reduced.
The Jianghuai Junling air conditioning filter is located under the hood, in the upper left corner of the engine.Junling is the basic model of Jianghuai light truck, and it is also the backbone of JAC light truck, located in the medium and short-distance intercity logistics market. Jianghuai light truck is the core business of Jianghuai commercial vehicles, and it is also the cornerstone of the development and growth of Jianghuai Automobile.
The air hole of Jianghuai Junling v6 urea box is next to the cover. There is an air hole on the side of the urea pump cover. Unscrew the lid to open the cover.
How to use trade data for pricing strategy-APP, download it now, new users will receive a novice gift pack.
1. It is the gasket of the oil radiator that is damaged or aging.The black impurities in the expansion tank are caused by the damage or aging of the gasket of the oil radiator. As a result, the water pipe is connected to the oil channel, the engine oil is mixed with the antifreeze, or the cylinder pad may be broken. Just go to the repair shop to check the cylinder pad and remove the bar head.
2. When the radiator tube is blocked by impurities, oil and scale, the cooling system will be blocked and the coolant temperature will be too high. The easiest way is to apply a layer of soap, wrap it with tape, and then tie it with wire or thin rope to prevent the antifreeze from leaking out. In this way, you can drive to the repair point to replace a new one.
3. Add coolant according to the specifications. Turn on the ignition switch, connect the vehicle diagnostic instrument, select "Start HEV electric water pump" to exhaust the air in the system. Check again whether the coolant level reaches the upper mark "MAX" of the low-temperature expansion tank, and add coolant if necessary.
4. The reasons are: the antifreeze is added too much and the expansion of the water, the antifreeze is mixed into petroleum products, causing the water, overheating and the water. If the antifreeze is added too much, it will expand and turn the water.
1. The radiator tank of this car is in the front of the car, the expansion tank is in the engine compartment, and the expansion tank is a white translucent jar. Most cars use water-cooled engines, which rely on the continuous circulation of coolant in the engine to take away heat.
2. Under the head cover of the car. Jac Junling v6 has a water tank. The automobile water tank, also known as the radiator, is the main part of the automobile cooling system. The water tank is an important part of the water-cooled engine. As an important component of the heat dissipation circuit of the water-cooled engine, it can absorb the heat of the cylinder block.
3. First, open the hood. The white transparent container in the upper left is the expansion tank. Check the pipe connection of the expansion tank. If there is no abnormality, find the expansion pot replenishment pipe and remove the old replenishment pipe. Finally, put in a new water replenishment tube, tighten it, and seal it.
The car expansion tank is filled with coolant. Coolant, the full name should be called antifreeze coolant, which means coolant with antifreeze function. Antifreeze can prevent the coolant from freezing and cracking the radiator and freezing the engine cylinder when parking in the cold season. Antifreeze is not only used in winter, but should be used all year round.
The expansion tank is a container made of steel plate welding, with various sizes and specifications. The expansion tank is usually connected to the following pipes: (1) Expansion tube, which transfers the volume of water in the system increased by heating and expansion to the expansion tank (connected to the return water trunk). ( 2) The overflow pipe is used to drain the excess water in the water tank that exceeds the specified water level.
The expansion tank is an important part of the HVAC system. Its function is to shelter and compensate for the expansion and contraction of water in the system, and it is also used for system water supply.Generally, the expansion tank is located at the highest point of the system, and it is usually connected to the return water trunk pipe near the suction port of the circulating water pump (central air conditioning frozen water circulating water pump).
The automobile expansion box is a coolant storage box that ensures that the radiator is full of coolant, so that the coolant in the radiator has space to be released when it expands under heat, has a compensation capacity when cooling and shrinks, and has a certain amount of excess water to avoid water shortage.
Function: The expansion tank is an important part of the HVAC system. It accommodates the expansion of the system water in the heating system, and also plays the role of constant pressure and replenishing water for the system. The expansion tank can also stabilize the pressure of the system and exclude the air released by water during the heating process.
1. The car using a water-cooled engine has a water tank. The car that uses a water-cooled engine has a heat sink and an expansion tank. The heat sink is in the front of the car, and the expansion tank is in the engine compartment. The water-cooled engine relies on the continuous circulation of antifreeze in the engine to dissipate heat.
2. The car has a water tank, and the car water tank is indispensable for the car.The automobile water tank is the main part of the automobile cooling system. The coolant in the automobile water tank can absorb the heat of the cylinder block and prevent the engine from overheating. Simply put, it has the function of cooling the car and dissipating heat.
3. The car water tank is under the hood of the vehicle. The car water tank is located under the hood of the vehicle. When you open the hood, you can see the water tank cover. There is generally a warning word "high temperature danger" on the water tank cover, which is equipped with antifreeze.
Hello, there is a cover at the door twist above the co-driver's door of the cab. Open it. With Pepsi bottle, you'd better add a little detergent to the water, so that the wiper and glass friction coefficient will be reduced.
The Jianghuai Junling air conditioning filter is located under the hood, in the upper left corner of the engine.Junling is the basic model of Jianghuai light truck, and it is also the backbone of JAC light truck, located in the medium and short-distance intercity logistics market. Jianghuai light truck is the core business of Jianghuai commercial vehicles, and it is also the cornerstone of the development and growth of Jianghuai Automobile.
The air hole of Jianghuai Junling v6 urea box is next to the cover. There is an air hole on the side of the urea pump cover. Unscrew the lid to open the cover.
HS code-based customs valuation tools
author: 2024-12-24 01:56Canada HS code classification assistance
author: 2024-12-24 01:33Canned foods HS code classification
author: 2024-12-24 01:18Latin America HS code compliance tips
author: 2024-12-24 01:02Trade intelligence for luxury goods
author: 2024-12-24 01:01Import data by HS code and country
author: 2024-12-24 02:21Precious stones HS code classification
author: 2024-12-24 02:01Trade intelligence for industrial equipment
author: 2024-12-24 00:42Trade data visualization dashboards
author: 2024-12-24 00:32967.49MB
Check889.83MB
Check879.61MB
Check433.13MB
Check137.45MB
Check432.93MB
Check757.23MB
Check875.55MB
Check439.62MB
Check716.47MB
Check781.88MB
Check353.52MB
Check275.77MB
Check942.62MB
Check181.19MB
Check878.36MB
Check543.13MB
Check718.71MB
Check328.35MB
Check445.43MB
Check271.79MB
Check831.59MB
Check277.36MB
Check819.71MB
Check293.28MB
Check849.47MB
Check427.96MB
Check489.29MB
Check621.66MB
Check882.95MB
Check268.99MB
Check961.88MB
Check995.31MB
Check917.79MB
Check673.46MB
Check478.41MB
CheckScan to install
How to use trade data for pricing strategy to discover more
Netizen comments More
1085 Trade compliance training resources
2024-12-24 02:41 recommend
1642 How to interpret trade deficit data
2024-12-24 02:29 recommend
2146 Real-time supply chain event updates
2024-12-24 01:27 recommend
485 How to use analytics for HS classification
2024-12-24 00:38 recommend
983 Commodity price indexing by HS code
2024-12-24 00:08 recommend